| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Manufacturing Community > Metal Corrosion Prevention Forum > Message
Main Menu
Find

[ List Subjects ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: Re: Corrosion factors: Stainless steel and Galvanized metal.

Date: 05/20/03 at 8:33 AM
Posted by: Richard Nay
E-mail: richard@vannay.com
Message Posted:

In Reply to: Corrosion factors: Stainless steel and Galvanized metal. posted by Vince Malfara on 05/19/03 at 10:06 PM:

Hello Vince

The corrosion factors while important should not be the focus. The fact that there are different metals that will be in contact means that there will be corrosion [reaction] that is unpredictable. Our position is that dissimilar metal corrosion will always occur and that even steel made from different batches is dissimilar. There are many ways to seperate the matals.Some are better than others. The ECK product in aerosol and liquid form can provide that protection. ECK has a patent and is used to prevent electrolysis/galvanic corrosion. Information about ECK can be found at www.vannay.com IF anything already put together can be taken apart, do so and apply ECK or something to seperate all dissimilar metals. If you have corrosion already I recommend grinding the surface,acid etch primer,top coat with paint,and reassemble using ECK.Thanks for your question and hope your project goes well !!
Richard


Follow Ups:


Post a Follow-up:

Name:
E-Mail:
Subject:

Message to Post:

 

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.