|
|
Main Menu
Find
[ List Subjects ][ Current Board ][ Post Message ]
[ View Followups ][ Post Followup ]
-
Date: 07/04/00 at 4:56 AM
Posted by: Jacek M. Holeczek
E-mail: holeczek@us.edu.pl
-
Hi,
I have here a couple of I/O cards with 8255 on them (actually NEC
D71055l-10). The problem is that quite often people shortcircut its
outputs to the ground, or to +5V, or to another output. Usually the chip
is dead then. I am looking for a replacement of these NEC chips from
another manufacturer which would be much less sensitive to such problems.
I don't really care about the output current (i don't need much), but I
really need a chip which survives shortcircuits (lasting 1 - 2 seconds
typically).
Thanks in advance,
Jacek.
P.S. No chance to protect these chips on board. All outputs are directly
connected to the 8255. Jacek.
Follow Ups:
Re: NEC D71055l-10 (8255, PLCC) replacement datasheet please Posted at: 07/28/03
(3)
Re: NEC D71055l-10 (8255, PLCC) replacement victor khor Posted at: 10/11/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement Phutai Sermsin Posted at: 10/02/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement KENT.YANG Posted at: 09/10/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement ALEX DEL VILLAR Posted at: 05/28/03
(1)
Re: NEC D71055l-10 (8255, PLCC) replacement Nagy Attila Posted at: 06/20/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement MOISES Posted at: 05/13/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement ramiro riquelme Posted at: 03/10/03
(6)
Re: NEC D71055l-10 (8255, PLCC) replacement VANESSA CHAVIRA Posted at: 07/24/03
(2)
Re: NEC D71055l-10 (8255, PLCC) replacement Ray Posted at: 10/01/03
(0)
D71055GB MARTIN ROJAS Posted at: 10/01/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement RAMIRO Posted at: 03/10/03
(2)
Re: NEC D71055l-10 (8255, PLCC) replacement ramiro Posted at: 03/10/03
(1)
Re: NEC D71055l-10 (8255, PLCC) replacement Artem Posted at: 10/04/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement ibrahim saral Posted at: 02/19/03
(0)
Re: NEC D71055l-10 (8255, PLCC) replacement Saddle Posted at: 07/27/00
(0)