| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Manufacturing Community > Industrial Robotics Forum > Message
Main Menu
Find

[ List Subjects ][ Current Board ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: Re: ABB S3 Through the Arc Seam Tracking

Date: 03/18/03 at 5:45 PM
Posted by: Nick Elwell
E-mail: nickel@ciservices.worldonline.co.uk
Message Posted:

In Reply to: ABB S3 Through the Arc Seam Tracking posted by Brad Harvey on 02/17/03 at 8:09 AM:

Hi Brad,

Weldguide 2 is not very good on tight radii. You say you are only using weldguide on the cap pass - are you putting down multiple passes? I assume the torch hits the part - which direction (sideways or down). What parameters are being uploaded to the weldguide unit at the start of the seam?

Please feel free to e-mail me directly


Follow Ups:


Post a Follow-up:

Name:
E-Mail:
Subject:

Message to Post:

 

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.