|
|
Main Menu
- Home
- Manufacturing Community
- Electrical and Electronic Community
- MyForum
- Used Equipment & Machines
- Links NEW
Find
[ Main Page ][ Current Board ][ Post Message ]
Foundry Technology Forum
Dedicated to the foundry industry for theory and techniques - Metallurgy, sand, cores, patterns and all other facets of the industry. Founder: Lee Seymour
Posting messages to the old boards has been disabled. Please use current board to post new messages. In the archives you could post followups still and make contribution to the knowledge base.
Lpdc info - kadam s b Posted on 02/01/02 at 3:52 AM
(2)
Re: Lpdc info - KHALEEL S Posted on 04/24/02 at 12:34 PM
(1)
Re: Lpdc info - ravichandran.c Posted on 08/19/03 at 5:48 AM
(0)
Upgrading/Implementing ISO 9001:2000? - Anas Abdul Posted on 01/28/02 at 7:05 PM
(1)
Re: Upgrading/Implementing ISO 9001:2000? - Eddie Boy Posted on 02/25/03 at 3:40 PM
(0)
Die Coating for Centrifugal Casting - Mahmud Syaltut Posted on 01/26/02 at 8:56 PM
(5)
Alpha Gyra 1 horizontal centrifugal casting machine (Required) - Mujtaba Ahmed Posted on 12/11/02 at 6:01 AM
(2)
CENTRIFUGAL CASTING(to the manufacturer's of the mentioned) - K.BHARATH KUMAR Posted on 05/23/03 at 1:54 AM
(1)
Re: CENTRIFUGAL CASTING-Vertical - N S CHANDRA SEKHAR/ ZIRCAST LIMITED, Posted on 10/07/03 at 5:55 AM
(0)
Re: Die Coating for Centrifugal Casting - shailesh patel Posted on 09/23/02 at 2:08 AM
(1)
Re: Die Coating for Centrifugal Casting - Ashir Ahmed Posted on 12/23/02 at 9:11 AM
(0)
Internal Shrinkage in SG iron-how to control? - Vikas Goel Posted on 01/24/02 at 11:35 PM
(16)
Re: Internal Shrinkage in SG iron-how to control? - nageshdhumma Posted on 09/06/03 at 10:23 AM
(0)
Re: Internal Shrinkage in SG iron-how to control? - birhan Posted on 08/04/03 at 9:28 AM
(0)
Re: Internal Shrinkage in SG iron-how to control? - saeed ghani moghadam Posted on 09/07/02 at 12:21 PM
(0)
Re: Internal Shrinkage in SG iron-how to control? - Mete Ülke Posted on 05/21/02 at 3:02 AM
(0)
Re: Internal Shrinkage in SG iron-how to control? - Ramin_Pejman Posted on 04/18/02 at 11:47 AM
(3)
Re: Internal Shrinkage in SG iron-how to control? - saeed ghani moghadam Posted on 09/07/02 at 12:24 PM
(0)
Re: Internal Shrinkage in SG iron-how to control? - Prasad Yadav Posted on 08/24/02 at 11:18 AM
(0)
Re: Internal Shrinkage in SG iron-how to control? - javad moslemi Posted on 07/23/02 at 1:27 AM
(0)
Re: Internal Shrinkage in SG iron-how to control? - PARSHOTAM KUMAR Posted on 04/01/02 at 12:31 PM
(0)
Re: Internal Shrinkage in SG iron-how to control? - Rudy Sillen Posted on 03/23/02 at 6:28 AM
(5)
Re: Internal Shrinkage in SG iron-how to control? - G.ELANGOVAN Posted on 10/05/03 at 12:52 PM
(2)
CRACK IN MALLEABLE CAM SHAFT - G.ELANGOVAN Posted on 10/05/03 at 12:56 PM
(1)
Re: CRACK IN MALLEABLE CAM SHAFT - g.elangovan Posted on 10/05/03 at 12:59 PM
(0)
equation for solidification shrinkage in terms of carbon and silicon in s.g. iron - sumod daniel Posted on 06/07/03 at 3:49 AM
(0)
Re: Internal Shrinkage in SG iron-how to control? - saeed ghani moghadam Posted on 09/07/02 at 12:23 PM
(0)
Re: Internal Shrinkage in SG iron-how to control? - Nazim Narcin Posted on 01/28/02 at 4:14 AM
(0)
sand coating - Kadam S B Posted on 01/20/02 at 11:18 PM
(0)
NiHard 4 - Ramin_Pejman Posted on 01/18/02 at 1:22 PM
(2)
Re: NiHard 4 - Aguinaldo Gonsalez Posted on 07/27/03 at 10:21 AM
(0)
Re: NiHard 4 - Jaan Mannik Posted on 09/26/02 at 9:09 AM
(0)
Post inoculant feeders - Bill Pflug Posted on 01/03/02 at 9:03 AM
(0)
casting sand properties - hassan ibrahim Posted on 12/27/01 at 8:44 PM
(4)
Re: casting sand properties - wael Posted on 10/03/03 at 2:29 PM
(0)
Re: casting sand properties - RajuRamaiah Posted on 05/14/03 at 2:02 AM
(1)
Re: casting sand properties - rzgar mhamed Posted on 05/14/03 at 7:44 AM
(0)
Re: casting sand properties - walid yosif Posted on 10/01/02 at 11:50 AM
(0)
shell mold - alex Posted on 12/26/01 at 12:06 AM
(1)
Re: shell mold - sridaran Posted on 02/25/03 at 11:00 AM
(0)
Metal Casting - Naveen C. M. Soni Posted on 12/25/01 at 10:03 PM
(3)
Precision Cast Molds - A. Shepherd Posted on 10/27/03 at 10:29 AM
(1)
Re: Precision Cast Molds - A. Shepherd Posted on 10/27/03 at 10:32 AM
(0)
Re: Metal Casting - Mark Dufresne Posted on 04/29/02 at 5:33 PM
(0)
I sell the report made by firm Stratecasts inc. for September, 2000 - aleka Posted on 12/25/01 at 3:56 AM
(1)
Re: I sell the report made by firm Stratecasts inc. for September, 2000 - Sophia Posted on 02/05/02 at 10:22 PM
(0)
Vacuum Assist Casting process - Jerry Fischman Posted on 12/18/01 at 8:20 AM
(3)
Re: Vacuum Assist Casting process - b r daga Posted on 12/20/01 at 11:10 AM
(2)
Re: Vacuum Assist Casting process - igor mariani Posted on 08/07/02 at 6:19 AM
(0)
Re: Vacuum Assist Casting process - shanavaz Posted on 05/24/02 at 9:03 AM
(0)
Foundry Management System - Ryan Posted on 11/19/01 at 6:15 PM
(1)
Re: Foundry Management System - Hammad Talib Posted on 01/21/02 at 12:48 AM
(0)
Custom Molds Fabricated - MyricksCustom Fab Posted on 11/01/01 at 8:34 PM
(1)
Re: Custom Molds Fabricated - Robert Denningham Posted on 02/11/02 at 9:43 PM
(0)
Required Continues Cast / Centrifugal Cast plant - Sumit Jain Posted on 11/01/01 at 12:56 PM
(0)
steel and mould castindg sand properties versus temperature - Jose A. Esquer Posted on 10/19/01 at 10:54 AM
(5)
Re: steel and mould castindg sand properties versus temperature - Arun Rao Posted on 11/03/01 at 10:31 PM
(4)
Re: steel and mould castindg sand properties versus temperature - nurian Posted on 11/24/01 at 3:29 AM
(1)
Re: steel and mould castindg sand properties versus temperature - Jonathan Posted on 02/19/02 at 1:10 AM
(0)
Re: steel and mould castindg sand properties versus temperature - Jose Antonio Esquer Posted on 11/08/01 at 8:12 AM
(1)
Re: steel and mould castindg sand properties versus temperature - dahiru Posted on 02/01/03 at 12:10 PM
(0)
Methylene Blue Test - WAYNE BLOOMFIELD Posted on 10/16/01 at 11:07 PM
(1)
Re: Methylene Blue Test - venkata Timmaraju Mallina Posted on 07/01/03 at 6:18 AM
(0)
Nihard4 - Ramin_Pejman Posted on 10/02/01 at 5:26 AM
(9)
Re: Nihard4 - Arun Rao Posted on 10/02/01 at 12:23 PM
(7)
Re: Nihard4 - Ramin_Pejman Posted on 10/03/01 at 3:26 AM
(6)
Re: Nihard4 - Arun Rao Posted on 10/03/01 at 12:19 PM
(5)
Re: Nihard4 - Hendrik Vanneste Posted on 01/17/03 at 4:31 AM
(0)
Grinding Rollers for Bowl Mills & Bull Ring Segments - sachin sharma Posted on 02/14/02 at 2:08 AM
(0)
Re: Nihard4 - Ramin_Pejman Posted on 01/19/02 at 7:40 AM
(0)
Re: Nihard4 - Ramin_Pejman Posted on 10/04/01 at 5:12 AM
(1)
Re: Nihard4 - Arun Rao Posted on 10/04/01 at 1:13 PM
(0)
inquiry about alcohol based zircon coating for moulds and cores - shamsipakistan pvt ltd Posted on 09/29/01 at 4:30 AM
(3)
Re: inquiry about alcohol based zircon coating for moulds and cores - Arun Rao Posted on 09/29/01 at 1:58 PM
(2)
Re: inquiry about alcohol based zircon coating for moulds and cores - ashok chirania Posted on 09/23/03 at 8:51 PM
(0)
Re: inquiry about alcohol based zircon coating for moulds and cores - nurian Posted on 11/24/01 at 3:40 AM
(0)
liquid crystal buffing machine - xingtao wu Posted on 09/26/01 at 5:16 PM
(0)
Drill bits for sale - Brian Bonner Posted on 09/18/01 at 10:43 AM
(0)
ni resist D5 with MO - piyush Posted on 09/14/01 at 7:22 PM
(0)
continuous tube brass casting or centrifugal tube brass casing foundry needed - American Cast Posted on 09/10/01 at 10:44 AM
(3)
Re: continuous tube brass casting or centrifugal tube brass casing foundry needed - Milapsinh Jadeja Posted on 06/26/03 at 2:01 PM
(2)
Re: continuous tube brass casting or centrifugal tube brass casing foundry needed - ums mould casting ltd.şti. Posted on 10/09/03 at 6:00 AM
(0)
Re: continuous tube brass casting or centrifugal tube brass casing foundry needed - ums mould casting ltd.şti. Posted on 10/09/03 at 5:57 AM
(0)
Sell latest ,fastest,accurate weighing & segregating machine for pressure die cast components - Arun Joshi Posted on 08/15/01 at 5:47 AM
(1)
i need one ton platform weighing machine - russel mahamood hussain Posted on 08/03/02 at 5:24 AM
(0)
Cool link-new tech information - Mark Beyer Posted on 08/07/01 at 6:32 AM
(0)
alloy casting -chromium.. - rajesh Posted on 08/03/01 at 1:19 PM
(5)
Re: alloy casting -chromium.. - taner mersin Posted on 01/11/02 at 7:00 PM
(2)
Re: alloy casting -chromium.. - Nusrat Alamdari Ilhici Posted on 03/07/03 at 1:06 PM
(1)
Re: alloy casting -chromium.. - taner mersin Posted on 03/10/03 at 3:21 AM
(0)
Re: alloy casting -chromium.. - taner mersin Posted on 12/23/01 at 5:20 PM
(0)
Re: alloy casting -chromium.. - Lee A. Seymour Posted on 08/04/01 at 6:27 PM
(0)
sulfur in ductile iron - Patty Sim Posted on 07/30/01 at 2:02 AM
(7)
Desulfurizer in ductile iron - JIANGXI XINJI METALS CO., LTD. Posted on 08/27/03 at 8:50 AM
(0)
Re: sulfur in ductile iron - saeed ghani moghadam Posted on 09/07/02 at 12:01 PM
(0)
Re: sulfur in ductile iron - Vikas Goel Posted on 01/24/02 at 11:31 PM
(4)
Re: sulfur in ductile iron to be depleted - Michael Xiong Posted on 08/27/03 at 8:47 AM
(3)
Desulfurizer in ductile iron - Shelly Posted on 08/27/03 at 8:53 AM
(2)
Re: Desulfurizer in ductile iron - Michael Xiong Posted on 08/27/03 at 8:54 AM
(1)
Re: Desulfurizer in ductile iron - Cheonfon Posted on 08/27/03 at 8:57 AM
(0)
Polok :pressure Die Casting m/c catloug - srikanth.g.k Posted on 07/17/01 at 12:51 AM
(0)
foundry defects - paul Posted on 07/16/01 at 5:10 PM
(11)
Re: foundry defects - VAIDYANATHAN Posted on 08/31/03 at 5:00 AM
(0)
Re: foundry defects - vaibahv Posted on 02/10/03 at 12:31 AM
(2)
Re: foundry defects - tarek adel Posted on 05/14/03 at 4:34 AM
(0)
Re: foundry defects - Kishore Tamhaney Posted on 05/10/03 at 3:51 AM
(0)
Re: foundry defects - vaibahv Posted on 02/10/03 at 12:22 AM
(0)
blow holes and pin holes on brake cylinders - nitish nayan Posted on 09/02/02 at 6:10 AM
(0)
Re: foundry defects - joel Posted on 11/21/01 at 5:47 AM
(1)
Re: foundry defects - Damian Garcia Posted on 02/15/03 at 3:02 PM
(0)
Re: foundry defects - Vikas Goel Posted on 07/26/01 at 7:40 AM
(0)
Re: foundry defects - Sanjiv Nehete Posted on 07/17/01 at 12:22 PM
(1)
Re: foundry defects - PARSHOTAM KUMAR Posted on 04/01/02 at 12:41 PM
(0)
gating system - piyush Posted on 07/12/01 at 7:56 PM
(13)
Re: gating system - aboozar Posted on 09/29/02 at 5:45 AM
(1)
Re: gating system - ehsan Posted on 08/09/03 at 11:03 AM
(0)
Re: gating system - Darshan singh Posted on 07/15/01 at 6:02 AM
(10)
mocri sherinkage and prosity defect around the neck in production piston - m.samet Posted on 10/30/02 at 6:55 PM
(0)
Re: gating system - b.saravanan Posted on 08/24/01 at 2:57 AM
(8)
Re: gating system - Jose L Valerio Posted on 05/13/02 at 6:10 PM
(7)
Re: gating system - Ehsan Posted on 08/09/03 at 11:07 AM
(1)
gating system - Mohammad Posted on 08/31/03 at 11:18 PM
(0)
Re: gating system - d.ramesh Posted on 10/12/02 at 2:40 AM
(4)
Re: gating system - Cristina Monteiro Posted on 03/29/03 at 1:12 PM
(2)
Re: gating system - NAYAN PATEL Posted on 07/09/03 at 8:35 AM
(1)
Re: gating system - fairuz Posted on 09/09/03 at 12:37 AM
(0)
Re: gating system - Jose Luis Valerio Posted on 10/14/02 at 8:24 AM
(0)
Bi-metal strips - Gennadi Fedorov Posted on 07/09/01 at 4:26 PM
(2)
Re: Bi-metal strips - Gennadi Fedorov Posted on 01/14/02 at 4:20 AM
(0)
Re: Bi-metal strips - farzad A.Z. Posted on 01/14/02 at 4:17 AM
(0)
gating system for connecting rod - pradeep anjaria Posted on 07/08/01 at 10:40 AM
(2)
Re: gating system for connecting rod - Darshan singh Posted on 07/10/01 at 12:00 PM
(1)
Re: gating system for connecting rod - pradeep anjaria Posted on 09/27/01 at 12:22 PM
(0)
gasses in grade HH - piyush Posted on 06/30/01 at 9:08 PM
(1)
Re: gasses in grade HH - Dr Arun Rao Posted on 07/08/01 at 6:11 AM
(0)
design on air Vents for gravity dies to cast aluminium - alonso de la garza Posted on 06/30/01 at 8:29 AM
(10)
Re: design on air Vents for gravity dies to cast aluminium - SURESH CHANDRA Posted on 10/21/03 at 6:16 AM
(0)
Re: design on air Vents for gravity dies to cast aluminium - SURESH CHANDRA Posted on 10/21/03 at 5:58 AM
(0)
Re: design on air Vents for gravity dies to cast aluminium - SARAT Posted on 08/22/02 at 4:19 AM
(0)
Re: design on air Vents for gravity dies to cast aluminium - pradeep anjaria Posted on 07/08/01 at 10:30 AM
(5)
problem in aluminium casting - mehrdad samet Posted on 11/01/02 at 2:58 PM
(4)
Re: problem in aluminium casting in pressure die casting dies - Shivananda kamath Posted on 06/25/03 at 11:18 PM
(1)
Re: problem in aluminium casting in pressure die casting dies - Malik Ishtiaq Ahmad Posted on 09/16/03 at 2:27 AM
(0)
Re: problem in aluminium casting - Shivananda kamath Posted on 06/25/03 at 11:16 PM
(1)
Re: problem in aluminium casting - Shivananda kamath Posted on 07/02/03 at 4:22 PM
(0)
Re: design on air Vents for gravity dies to cast aluminium - Darshan singh Posted on 07/04/01 at 9:02 AM
(0)
Continuous casting with Pb>100ppm - Cristian Piani Posted on 06/27/01 at 3:00 PM
(0)
Recycling of Metallic Dust - How? - Matt Snowdon Posted on 06/12/01 at 6:14 AM
(3)
Re: Recycling of Metallic Dust - How? - Sergio Villanueva B. Posted on 07/05/01 at 11:22 AM
(0)
Re: Recycling of Metallic Dust - How? - Cristian Piani Posted on 06/21/01 at 4:49 PM
(1)
Re: Recycling of Metallic Dust - How? - Mark Schull Posted on 06/26/01 at 9:26 PM
(0)
perosity in lead battery grids - Steve Lewis Posted on 05/10/01 at 12:45 AM
(2)
Re: perosity in lead battery grids - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India] Posted on 05/10/01 at 10:53 PM
(1)
Casting grids of Lead-Antimony Alloy is brittle and dark colour. - bichnga Posted on 10/14/03 at 10:43 PM
(0)
zinc in ductile iron - nazim narcin Posted on 05/01/01 at 6:39 AM
(0)
Melting Copper in cupola - Arun Rao Posted on 04/29/01 at 6:52 AM
(8)
Re: Melting Copper in cupola - HUYNH CUONG Posted on 11/17/01 at 11:09 AM
(1)
Re: Melting Copper in cupola - saeed ghani moghadam Posted on 09/07/02 at 11:26 AM
(0)
Re: Melting Copper in cupola - saurabh garg Posted on 09/18/01 at 11:47 AM
(4)
Re: Melting Copper in cupola - HUYNH CUONG Posted on 11/17/01 at 11:18 AM
(3)
Re: Melting Copper in cupola - hpishgar Posted on 03/11/03 at 2:59 PM
(1)
Re: Melting Copper in cupola - abdallh zedan Posted on 10/01/03 at 12:39 PM
(0)
Re: Melting Copper in cupola - saeed ghani moghadam Posted on 09/07/02 at 11:28 AM
(0)
Re: Melting Copper in cupola - Sergio Villanueva B. Posted on 07/05/01 at 10:07 AM
(0)
zircon foundry sand - stuart a fotheringham Posted on 04/27/01 at 9:08 AM
(2)
Re: zircon foundry sand - sergio Posted on 05/17/01 at 3:57 PM
(1)
Re: zircon foundry sand - Dinesh Singh Posted on 09/30/02 at 3:57 AM
(0)
permante mould help - scott Posted on 04/21/01 at 11:45 PM
(3)
Re: permante mould help - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India] Posted on 05/05/01 at 8:53 AM
(2)
Re: ayuda del molde del permante - ENRIQUE BRAVO M. Posted on 08/14/01 at 11:33 AM
(0)
Re: permante mould help - Darshan Singh. Posted on 05/05/01 at 9:12 AM
(0)
metal melting point - marshall mcCleary Posted on 04/16/01 at 6:18 AM
(8)
Re: metal melting point - sajjad Posted on 08/29/03 at 12:38 PM
(0)
Re: metal melting point - emma Posted on 01/21/03 at 7:58 PM
(5)
Re: metal melting point - tracy Posted on 03/17/03 at 7:01 PM
(1)
Re: metal melting point - Gautom Kumar Das Posted on 09/21/03 at 1:38 AM
(0)
Re: metal melting point - tracy Posted on 03/17/03 at 6:59 PM
(1)
Re: metal melting point - Marcus Lentini Posted on 11/05/03 at 8:16 AM
(0)
Re: metal melting point - tracy Posted on 03/17/03 at 6:52 PM
(0)
Re: metal melting point - reinal rachmavial Posted on 07/20/01 at 2:29 AM
(0)
stream inoculation - Sekhar Rao Posted on 04/15/01 at 10:34 AM
(5)
Re: stream inoculation - Dr Arun Rao Posted on 04/19/01 at 12:14 PM
(4)
Re: stream inoculation - sekhar rao Posted on 04/20/01 at 7:05 AM
(3)
Re: stream inoculation - Vikas Goel Posted on 04/21/01 at 4:47 AM
(2)
Re: stream inoculation - sekhar rao Posted on 05/01/01 at 11:00 AM
(1)
Re: stream inoculation - Vikas Goel Posted on 05/10/01 at 11:22 PM
(0)
hardness - pradeep anjaria Posted on 04/14/01 at 4:57 AM
(3)
Re: hardness - D.Aris Sandi Posted on 05/24/01 at 7:53 PM
(1)
Re: hardness - reinal rachmavial Posted on 07/20/01 at 2:45 AM
(0)
Re: hardness - D.Aris Sandi Posted on 05/24/01 at 7:50 PM
(0)
Help with Cokeless Cupola - Vikas Goel Posted on 04/13/01 at 5:17 AM
(4)
Re: Help with Cokeless Cupola - aravind kamath Posted on 12/05/02 at 1:45 AM
(1)
Re: Help with Cokeless Cupola - Vikas goel Posted on 12/05/02 at 7:42 AM
(0)
Re: Cokeless Cupola refractory balls in the heating Zone - K Ranganathan Posted on 01/23/02 at 12:34 AM
(1)
Re: Cokeless Cupola refractory balls in the heating Zone - Vikas Goel Posted on 01/24/02 at 11:23 PM
(0)
A type graphite formation in Grey Iron - Vikas Goel Posted on 04/03/01 at 7:50 AM
(9)
Re: A type graphite formation in Grey Iron - tarek adel Posted on 05/06/03 at 5:12 AM
(1)
Re: A type graphite formation in Grey Iron - Vikas Goel Posted on 05/07/03 at 12:12 AM
(0)
Re: A type graphite formation in Grey Iron - saeed ghani moghadam Posted on 09/07/02 at 12:04 PM
(0)
Re: A type graphite formation in Grey Iron - Dr Arun Rao Posted on 04/04/01 at 10:04 AM
(5)
details of microstructural defects in casting - manjunath Posted on 05/08/03 at 12:57 AM
(1)
Re: details of microstructural defects in casting - harjit singh Posted on 09/29/03 at 9:03 AM
(0)
Re: A type graphite formation in Grey Iron - saeed ghani moghadam Posted on 09/07/02 at 12:01 PM
(1)
Re: A type graphite formation in Grey Iron - rehaili kamel Posted on 05/18/03 at 3:50 PM
(0)
Re: A type graphite formation in Grey Iron - Vikas Goel Posted on 04/07/01 at 6:01 AM
(0)
wants to sellcast iron components automobile, industrial - m.rajendran Posted on 03/24/01 at 3:56 AM
(0)
Case studies for casting defects : causes and remedies - Nitin Datar Posted on 03/24/01 at 12:44 AM
(24)
request info about titanium casting defects - alireza azizi Posted on 10/09/03 at 7:47 AM
(0)
Re: Case studies for welding defects : causes and remedies - ABDUL WAJID Posted on 09/21/02 at 2:02 AM
(5)
Re: Case studies for welding defects : causes and remedies - vijayant Posted on 10/05/03 at 5:17 AM
(0)
Re: Case studies for welding defects : causes and remedies - Ramesh Singh Posted on 12/14/02 at 11:45 AM
(3)
Re: Case studies for welding defects : causes and remedies - kapil Posted on 06/18/03 at 2:30 PM
(2)
Re: Case studies for welding defects : causes and remedies - Eng/ Muhammad Abbas Posted on 06/19/03 at 11:46 AM
(1)
Re: Case studies for welding defects : causes and remedies - Maira Vargas Posted on 10/11/03 at 4:29 PM
(0)
Re: Case studies for casting defects : causes and remedies - C.J.Murali Posted on 06/27/01 at 11:55 PM
(5)
Re: Case studies for casting defects : causes and remedies - nana Posted on 04/14/03 at 10:41 AM
(0)
Re: Case studies for casting defects : causes and remedies - Joel Saverna Posted on 11/23/01 at 5:29 AM
(0)
Re: Case studies for casting defects : causes and remedies - ljhlkj Posted on 10/30/01 at 1:10 PM
(2)
Re: Case studies for casting defects : causes and remedies - nana Posted on 04/14/03 at 10:44 AM
(0)
Re: Case studies for casting defects : causes and remedies - nana Posted on 04/14/03 at 10:42 AM
(0)
Re: Case studies for casting defects : causes and remedies - Dr Arun Rao Posted on 03/25/01 at 11:05 AM
(10)
Re: Case studies for casting defects : causes and remedies - Mukasa Joseph KIwanuka Posted on 11/04/03 at 12:13 PM
(0)
Re: Case studies for casting defects : causes and remedies - abdul wase Posted on 09/16/01 at 11:37 AM
(3)
Re: Case studies for casting defects : causes and remedies - rhishikesh kulkarni Posted on 10/15/03 at 10:32 AM
(0)
Re: Case studies for casting defects : causes and remedies - ScorpE Posted on 11/03/02 at 8:34 AM
(0)
Re: Case studies for casting defects : causes and remedies - ScorpE Posted on 11/03/02 at 8:33 AM
(0)
Re: Case studies for casting defects : causes and remedies - sumit/rajiv Posted on 06/25/01 at 1:53 AM
(3)
Re: Case studies for casting defects : causes and remedies - liew evonne Posted on 05/29/03 at 10:58 AM
(0)
Re: Case studies for casting defects : causes and remedies - scorpe Posted on 11/03/02 at 8:36 AM
(1)
Re: Case studies for casting defects : causes and remedies - nana Posted on 04/14/03 at 10:52 AM
(0)
Re: Case studies for casting defects : causes and remedies - chandrakumar.s Posted on 05/16/01 at 2:11 AM
(0)
Use of Barium bearing alloy in Ductile iron - Vikas Goel Posted on 03/17/01 at 4:37 AM
(2)
Re: Use of Barium bearing alloy in Ductile iron - saeed ghani moghadam Posted on 09/07/02 at 12:08 PM
(0)
Re: Use of Barium bearing alloy in Ductile iron - Dr Arun Rao Posted on 03/17/01 at 9:37 AM
(0)
design of vent valves for a lead casting mold - Carlos Velazquez Posted on 03/09/01 at 6:50 PM
(1)
Re: design of vent valves for a lead casting mold - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India]a Posted on 05/05/01 at 9:31 AM
(0)
RT vs. UT correlation of casting defects - Dave Carr Posted on 03/08/01 at 6:35 AM
(1)
Re: RT vs. UT correlation of casting defects - piyush Posted on 06/30/01 at 8:51 PM
(0)
Perforated wear plate - Dr Arun Rao Posted on 03/07/01 at 10:54 AM
(1)
Re: Perforated wear plate - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India]a Posted on 05/05/01 at 9:53 AM
(0)
help with english vocab in foundry business - michael crispin Posted on 03/05/01 at 10:00 AM
(3)
Re: help with english vocab in foundry business - Joel Saverna Posted on 11/23/01 at 5:43 AM
(0)
Re: help with english vocab in foundry business - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India] Posted on 05/11/01 at 10:23 PM
(0)
Re: help with english vocab in foundry business - Dr Arun Rao Posted on 03/07/01 at 10:49 AM
(0)
Design of liner plates - Dr Arun Rao Posted on 03/03/01 at 12:07 PM
(2)
Re: Design of liner plates - Josef Galster Posted on 12/13/02 at 9:33 AM
(0)
Re: Design of liner plates - taner mersin Posted on 04/02/01 at 6:17 AM
(0)
gassy nihard metal - Dr Arun Rao Posted on 02/05/01 at 10:38 AM
(2)
Re: gassy nihard metal - taner mersin Posted on 05/31/01 at 8:26 AM
(1)
Re: gassy nihard metal - RAJU RAI Posted on 06/27/01 at 11:15 AM
(0)
8620 steel - Dr Arun Rao Posted on 01/25/01 at 9:10 AM
(3)
Re: 8620 steel - Jose Romero Posted on 03/20/02 at 9:46 PM
(0)
Re: 8620 steel - Oliver Robbins Posted on 02/19/02 at 1:18 AM
(0)
Re: 8620 steel - Lee Seymour Posted on 01/25/01 at 10:02 PM
(0)
casting brass tube in a continuous casting furnace - Daniel Machet Posted on 01/16/01 at 1:46 AM
(4)
4" sq. Brass tube - Tony Brenta (Phoenix Day Co.) Posted on 03/08/02 at 4:08 PM
(0)
Re: casting brass tube in a continuous casting furnace - Hans A. Koch Posted on 07/01/01 at 3:58 AM
(0)
Re: casting brass tube in a continuous casting furnace - GJ Christenson Posted on 01/17/01 at 8:27 AM
(1)
Re: casting brass tube in a continuous casting furnace - Daniel Machet Posted on 01/17/01 at 11:36 PM
(0)
Alumnium Forgings - Murph Posted on 12/20/00 at 11:04 PM
(2)
Re: Alumnium Forgings - bruce Posted on 04/15/02 at 10:51 PM
(0)
Re: Alumnium Forgings - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India] Posted on 05/17/01 at 9:44 PM
(0)
Feeding calculation in plaster casting - Ana García Posted on 12/15/00 at 9:31 AM
(2)
Re: Feeding calculation in plaster casting - mofeid Posted on 11/12/02 at 3:30 AM
(0)
Re: Feeding calculation in plaster casting - Shane Hanson Posted on 07/24/01 at 10:04 AM
(0)
Tapping from EAF - Saltem Posted on 12/08/00 at 3:52 PM
(3)
Re: Tapping from EAF - Cristian Piani Posted on 06/21/01 at 4:45 PM
(0)
Re: Tapping from EAF - Dr Arun Rao Posted on 01/01/01 at 10:32 AM
(1)
Re: Tapping from EAF - steve kamykowski Posted on 01/26/01 at 3:46 PM
(0)
Pure Iron - Simon Miller Posted on 11/16/00 at 3:42 AM
(4)
Re: Pure Iron - scott mcclinton Posted on 06/04/03 at 4:26 AM
(2)
Re: importation of Pure Iron - Allen Gao Posted on 07/29/03 at 9:20 PM
(1)
Re: importation of Pure Iron - kumar Posted on 09/10/03 at 2:45 AM
(0)
Re: Pure Iron - saeed ghani moghadam Posted on 09/07/02 at 12:35 PM
(0)
Bi Metal Strips - Sumit Jain Posted on 11/04/00 at 11:56 PM
(7)
Re: Bi Metal Strips - Trevor Habberstad Posted on 12/09/02 at 8:49 PM
(0)
Re: Bi Metal Strips - simon kimpton Posted on 03/05/02 at 3:50 PM
(0)
Re: Bi Metal Strips - Pneumatico Enterprises Posted on 01/25/01 at 2:12 AM
(3)
Re: Bi Metal Strips - sizwe marketing engineering Posted on 05/14/01 at 7:30 AM
(2)
Re: Bi Metal Strips - Amitabh Kejriwal Posted on 09/21/01 at 4:07 PM
(1)
Bi Metal Strips - AAKASH JAIN Posted on 11/05/03 at 3:46 AM
(0)
Amateur Mining Operation - Glen Lodge Posted on 10/26/00 at 11:23 AM
(0)
Seeking Course Directors/Subject Matter Experts - Andrew Posner Posted on 10/20/00 at 1:05 PM
(0)
Sound of Casting - Cees van de Velde Posted on 10/04/00 at 1:58 PM
(0)
Effect of boron in perlite formation of a ductile iron - Daniel Santos Posted on 10/02/00 at 3:29 AM
(3)
Re: Effect of boron in perlite formation of a ductile iron - saeed ghani moghadam Posted on 09/07/02 at 12:35 PM
(0)
Re: Effect of boron in perlite formation of a ductile iron - Raj Posted on 05/12/02 at 11:17 AM
(1)
Re: Effect of boron in perlite formation of a ductile iron - saeed ghani moghadam Posted on 09/07/02 at 12:05 PM
(0)
Impurities / voids in large castings - Ron Clough Posted on 09/27/00 at 12:40 PM
(0)
diecoat in LP aluminium casting - barker Posted on 09/27/00 at 5:07 AM
(0)
17-4ph heat treat - Lee Seymour Posted on 09/20/00 at 12:46 PM
(0)
New MELTEC diecasting machine at Raytec-1st for UK! - John Salt Posted on 09/19/00 at 1:41 PM
(0)
heat-treatment - Sandeep Bathla Posted on 09/14/00 at 8:32 PM
(4)
Re: heat-treatment - Lee Seymour Posted on 09/15/00 at 9:20 PM
(3)
Re: heat-treatment - R. B. Nagarkar Posted on 12/05/01 at 6:08 AM
(0)
Re: heat-treatment - Dr Arun Rao Posted on 09/18/00 at 12:27 PM
(1)
Re: heat-treatment - morteza mallaky fard Posted on 02/27/01 at 8:14 AM
(0)
casting surface finish - Sandeep Bathla Posted on 09/14/00 at 8:31 PM
(4)
Re: casting surface finish - Dr Arun Rao Posted on 09/18/00 at 12:20 PM
(0)
Re: casting surface finish - Lee Seymour Posted on 09/15/00 at 9:05 PM
(2)
Re: casting surface finish - thirumal Posted on 09/02/03 at 12:24 PM
(0)
Re: casting surface finish - wouter gijs Posted on 01/02/01 at 4:37 AM
(0)
heat-treatment - Sandeep Bathla Posted on 09/14/00 at 8:28 PM
(0)
Reclaiming of aluminium from used auto parts - Bob Posted on 09/02/00 at 12:16 AM
(3)
Re: Reclaiming of aluminium from used auto parts - davut bilgesu Posted on 07/29/03 at 8:08 AM
(0)
Re: Reclaiming of aluminium from used auto parts - sharray sibley Posted on 06/08/01 at 8:38 AM
(0)
Re: Reclaiming of aluminium from used auto parts - Dr Arun Rao Posted on 09/06/00 at 12:30 PM
(0)
heat treatment of high chrome irons - Dr Arun Rao Posted on 07/28/00 at 9:32 PM
(3)
Re: heat treatment of high chrome irons - piyush Posted on 06/30/01 at 9:01 PM
(0)
Re: heat treatment of high chrome irons - Munyaradzi Chiremba Posted on 02/22/01 at 11:54 AM
(0)
Re: heat treatment of high chrome irons - djoko susilo Posted on 02/04/01 at 10:17 AM
(0)
Casting aluminum in aluminum molds - Tom Bloomer Posted on 07/20/00 at 1:08 PM
(4)
Re: Casting aluminum in aluminum molds - Mike Westmoreland Posted on 01/26/01 at 11:27 PM
(3)
Re: Casting aluminum in aluminum molds - martin cloutier Posted on 05/14/02 at 1:09 PM
(2)
Re: Casting aluminum in aluminum molds - sarat Posted on 10/11/02 at 5:54 AM
(0)
Re: Casting aluminum in aluminum molds - sarat Posted on 10/11/02 at 5:38 AM
(0)
Tin, Blue colouration? - kunifer Posted on 07/16/00 at 2:50 AM
(2)
Re: Tin, Blue colouration? - GJ Christenson Posted on 08/02/00 at 9:43 PM
(1)
Re: Tin, Blue colouration? - Adel Hassan Posted on 09/13/03 at 10:56 AM
(0)
Thermal Analysis Software - Tim Kelly Posted on 07/05/00 at 10:40 AM
(0)
nodule distribution in ductile iron - maxpenge Posted on 06/30/00 at 6:03 AM
(4)
Re: nodule distribution in ductile iron - saeed ghani moghadam Posted on 09/07/02 at 11:52 AM
(0)
Re: nodule distribution in ductile iron - v.s. chougule Posted on 11/20/00 at 11:13 AM
(0)
Re: nodule distribution in ductile iron - Cees van de Velde Posted on 07/02/00 at 11:36 AM
(1)
Re: nodule distribution in ductile iron - saeed ghani moghadam Posted on 09/07/02 at 12:30 PM
(0)
disposable polymer thread or equivalent - Mike Mc Posted on 06/23/00 at 8:00 PM
(0)
High Thermal Conductivity Steel - Mike Mc Posted on 06/23/00 at 7:43 PM
(0)
WinAlloy-autodatabase of 15000 alloys & n-ferrous metals from 33 countries - Sergei Kornienko Posted on 06/20/00 at 10:05 AM
(0)
WinSteel-autodatabase of 48000 steel grades from 24 countries. - Sergei Kornienko Posted on 06/20/00 at 10:03 AM
(6)
Re: WinSteel-autodatabase of 48000 steel grades from 24 countries. - Mohammed Talha Posted on 05/07/03 at 10:45 AM
(0)
Re: WinSteel-autodatabase of 48000 steel grades from 24 countries. - Karl Erpf Posted on 01/14/03 at 8:02 AM
(0)
Re: WinSteel-autodatabase of 48000 steel grades from 24 countries. - Mohan Potdar Posted on 10/11/02 at 12:51 PM
(0)
Re: WinSteel-autodatabase of 48000 steel grades from 24 countries. - MANGESH SAKURIKAR Posted on 10/04/00 at 1:28 PM
(0)
Re: WinSteel-autodatabase of 48000 steel grades from 24 countries. - Nidhesh Posted on 09/27/00 at 9:41 AM
(0)
Re: WinSteel-autodatabase of 48000 steel grades from 24 countries. - Jim Supanich Posted on 09/14/00 at 9:05 AM
(0)
Aluminum Bronze Test bars - S.P.Srivastava Posted on 06/02/00 at 7:11 AM
(0)
A casting of aluminum with a copper tube - Lance Posted on 05/30/00 at 3:48 PM
(13)
Re: A casting of aluminum with a copper tube - todd Posted on 01/19/02 at 8:44 PM
(0)
Re: A casting of aluminum with a copper tube - wouter gijs Posted on 10/10/01 at 3:50 PM
(0)
Re: A casting of aluminum with a copper tube - wouter gijs Posted on 12/18/00 at 4:52 AM
(0)
Re: A casting of aluminum with a copper tube - Darshan Singh Posted on 08/27/00 at 6:33 AM
(2)
Re: A casting of aluminum with a copper tube - peter saint Posted on 05/25/01 at 8:12 AM
(1)
Re: A casting of aluminum with a copper tube - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India] Posted on 05/27/01 at 5:43 AM
(0)
Re: A casting of aluminum with a copper tube - Lee Posted on 05/31/00 at 10:06 PM
(6)
Re: A casting of aluminum with a copper tube - Lance Posted on 05/31/00 at 10:08 PM
(5)
Re: A casting of aluminum with a copper tube - Todd Posted on 01/19/02 at 8:41 PM
(0)
Re: A casting of aluminum with a copper tube - Lee Posted on 06/29/00 at 9:29 PM
(0)
Re: A casting of aluminum with a copper tube - John M Posted on 06/01/00 at 10:17 PM
(2)
Re: A casting of aluminum with a copper tube - richard Posted on 06/25/00 at 5:50 PM
(1)
Re: A casting of aluminum with a copper tube - Barrie Blake Posted on 08/15/00 at 4:33 AM
(0)
high speed machining of cast irons - Dr.Rajagopalachary Tirumala Posted on 05/21/00 at 11:05 AM
(0)
Let us quote the tools and items before you use your regular suppliers. - BRIAN BONNER Posted on 05/05/00 at 11:59 AM
(0)
Die Casting - Gavin Matthews Posted on 04/25/00 at 4:05 PM
(9)
Re: Die Casting - Darshan Singh, Super Auto Mfrs.,Indl.Estate, Patiala 147001 [India]a Posted on 05/13/01 at 10:42 PM
(0)
Re: Die Casting - Ajit Khanna Posted on 08/22/00 at 5:29 AM
(7)
Re: Die Casting - Cigdem Posted on 04/30/01 at 3:00 PM
(4)
Aluminum die-casting machine - Saleh a al_rumeh Posted on 08/22/03 at 1:04 AM
(0)
Re: Mold & Die Casting - Jirayu Posted on 11/19/02 at 1:44 AM
(0)
Polok :pressure Die Casting m/c catloug - srikanth.g.k Posted on 07/17/01 at 12:47 AM
(1)
Re: Polok :pressure Die Casting m/c catloug - kamran Posted on 01/16/03 at 5:57 PM
(0)
Re: Die Casting - P.J.A Manoj Posted on 03/21/01 at 12:46 AM
(0)
Re: Die Casting - Su tedi Posted on 10/29/00 at 10:02 AM
(0)
Continuous Casting of Brass - Greg Postma Posted on 04/14/00 at 8:45 PM
(8)
Re: Continuous Casting of Brass - Rauomead Posted on 03/19/01 at 5:05 AM
(0)
Re: Continuous Casting of Brass - Nick Jaber Posted on 01/02/01 at 5:01 PM
(2)
Re: Continuous Casting of Brass - amin_k Posted on 12/03/02 at 1:38 AM
(1)
Re: Continuous Casting of Brass - Jafar Mahmoudi Posted on 09/21/03 at 5:54 AM
(0)
Re: Continuous Casting of Brass - GJ Christenson Posted on 07/27/00 at 10:09 AM
(1)
Re: Continuous Casting of Brass - hossein pishgar Posted on 03/11/03 at 3:09 PM
(0)
Re: Continuous Casting of Brass - David Shore Posted on 04/18/00 at 6:51 AM
(0)
Re: Continuous Casting of Brass - Lee Seymour Posted on 04/14/00 at 10:46 PM
(0)
Stainless Deoxidation - Lee Seymour Posted on 04/06/00 at 10:23 AM
(7)
Re: Stainless Deoxidation - Ghasem Babaki Posted on 06/30/03 at 3:24 PM
(0)
Re: Stainless Deoxidation - Dr Arun Rao Posted on 07/28/00 at 9:36 PM
(3)
Re: Stainless Deoxidation - alireza Posted on 11/24/02 at 3:58 AM
(0)
Re: Stainless Deoxidation - Nick Jaber Posted on 01/02/01 at 2:36 AM
(1)
Re: Stainless Deoxidation - ALIREZA Posted on 11/24/02 at 3:57 AM
(0)
Re: Stainless Deoxidation - Mike Mc Posted on 06/23/00 at 7:25 PM
(1)
Re: Stainless Deoxidation - alireza Posted on 11/24/02 at 3:59 AM
(0)
Pattern making supplies. - Glenn Duncan Posted on 04/04/00 at 8:25 PM
(3)
Stainles Steel Deoxidation - Ignacio Cristobal Sanchez Posted on 03/01/01 at 10:38 AM
(0)
Re: Pattern making supplies. - Bob Schooks Posted on 10/31/00 at 3:15 PM
(0)
Re: Pattern making supplies. - Eric Gossard Posted on 05/18/00 at 3:14 AM
(0)
Small Al furnace - James Aduskevich Posted on 04/04/00 at 12:12 PM
(10)
Re: Small Al furnace - Dee Fernbach Posted on 01/03/01 at 7:41 AM
(0)
Re: Small Al furnace - Nick Jaber Posted on 01/02/01 at 4:47 PM
(0)
Re: Small Al furnace - Darshan Singh Posted on 08/27/00 at 6:05 AM
(1)
Re: Small Al furnace - Sdeery Posted on 04/23/01 at 10:06 PM
(0)
Re: Small Al furnace - Gord Posted on 04/06/00 at 8:39 PM
(1)
Re: Small Al furnace - mayank selot Posted on 04/28/03 at 10:17 AM
(0)
Re: Small Al furnace - Glenn Duncan Posted on 04/04/00 at 8:18 PM
(2)
Re: Small Al furnace - Dave Anderson Posted on 04/04/00 at 8:36 PM
(1)
Re: Small Al furnace - Ken McKenzie Posted on 04/08/00 at 11:08 AM
(0)
plaster casting - Mark W. Posted on 04/04/00 at 9:06 AM
(4)
Re: plaster casting - Darshan Singh Posted on 08/27/00 at 12:09 PM
(0)
Re: plaster casting - John Girrbach Posted on 05/08/00 at 10:19 PM
(0)
Re: plaster casting - L. Seymour Posted on 04/06/00 at 10:54 AM
(0)
Re: plaster casting - Dave Anderson Posted on 04/04/00 at 8:44 PM
(0)
Welcome! - Webmaster Posted on 04/04/00 at 1:58 AM
(3)
frozen form - Igor Posted on 05/09/00 at 11:23 PM
(2)
Re: frozen form - Lee Seymour Posted on 06/29/00 at 9:36 PM
(1)
Re: frozen form - Barry Donoghue Posted on 10/27/00 at 3:59 PM
(0)
[ Administrative Control Panel ]