| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Electrical and Electronic Community > Analog Circuit Design Forum > Message
Main Menu
Find

[ List Subjects ][ Main Page ]
[ View Followups ][ Post Followup ]

Subject: Re: Voltage Doubler???

Date: 02/08/02 at 9:44 AM
Posted by: John Dunn - Consultant
E-mail: ambertec@ieee.org
Message Posted:

In Reply to: Re: Voltage Doubler??? posted by Russ Kincaid on 02/07/02 at 5:11 PM:

Phantom power is used to provide operating power to microphone preamplifiers via what is called an XLR connector.

Pin 1 is ground while pins 2 and 3 carry differential audio. On top of that digital audio, a +48 VDC source is connected via two matched 6.81K resistors to pins 2 and 3. The said preamplifier derives its DC operating power from the same two pins to which it deilvers push-pull audio output.

Some web sites to look at are at:

http://www.google.com/search?hl=en&q=phantom+power&spell=1


(You can ignore the sites devoted to the F4 Phantom jet fighter plane.)

Good luck.

John Dunn - President
Ambertec, Inc.
ambertec@ieee.org


Follow Ups:


Post a Follow-up:

Name:
E-Mail:
Subject:

Message to Post:

 

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.