| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Electrical and Electronic Community > Electronics Manufacturing and Automation Forum > Message
Main Menu
Find

[ List Subjects ][ Current Board ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: profibus between S5 and S7 from Siemens

Date: 06/19/02 at 9:07 AM
Posted by: Leonardo Abilikos
E-mail: leonardo_abilikos@hotmail.com
Message Posted:

I want to make a profibus communication between below mentions Siemens devices:S5-155 U with an IM308-C, this must be the masterS7-314C-2DP, this is one of the slavesTP170B, as slave for the S7-314C-2DPI have no much experience with profibus, but I collected some information and this is what I know yet:To make the profibus configuration I will have to use com profibus (because the S5 is the master). I also will need the GSD-files of the slave devices to be added to com profibusIn the Simatic manager I will have to configure my S7-314C-2DP and TP170B as slave.So far do good…? (please correct me if I am wrong or if there is a better way)What I do not know is how to write my communication program (as the S5 is the master I assume my program has to written in S5?)Is the someone of you have experience with a similar project of knows how to solve my problem? Maybe somebody could provide me with a example?Anyway, all kinds of suggestions are very welcome! Thanks Leonardo

Follow Ups:


Post a Follow-up:

Name:
E-Mail:
Subject:

Message to Post:

 

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.