| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Manufacturing Community > Coatings & Resins Forum > Message
Main Menu
Find

[ List Subjects ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: two side coatings on deep drawing steel coil

Date: 12/05/01 at 6:15 AM
Posted by: Martin Matula
E-mail: mmatula@visteon.com
Message Posted:

I am looking for a supplier that can coat a deep drawing steel coil. Both sides of the substrate will need different coating :
1. side : bright silver colour
2. side : matte dark {black} colour
The colour shade should be stable up to 350 or 400C.


The sheet of substrate is 150mm wide, 0.5mm thick and is contained on a roll about 100m long.
Once coated, the material needs to be kept on the roll for further processing.



Follow Ups:


Post a Follow-up:

Name:
E-Mail:
Subject:

Message to Post:

 

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.