|
|
Main Menu
Find
[ Main Page ][ Current Board ][ Post Message ]
Forum of High Vacuum Technology/Processing/Coating
Information exchange on all phases of Vacuum Processing and Equipment including systems, evaporation, sputtering, measurement, melting, and related technologies. Moderator: Pat McMahon
Posting messages to the old boards has been disabled. Please use current board to post new messages. In the archives you could post followups still and make contribution to the knowledge base.
test - Sanjeev Posted on 04/05/03 at 9:31 AM
(0)
Evaporated Gold doesn't lift from Substrate, please advise. - Michael Buschmann Posted on 01/07/03 at 4:18 PM
(5)
check your resist profile - zhengwf Posted on 10/19/03 at 9:09 PM
(0)
Re: Evaporated Gold doesn't lift from Substrate, please advise. - Nijaz Ruhotina Posted on 03/03/03 at 8:16 PM
(0)
Re: Evaporated Gold doesn't lift from Substrate, please advise. - Jan Berry Posted on 01/08/03 at 8:27 PM
(0)
Re: Evaporated Gold doesn't lift from Substrate, please advise. - Donald Mattox Posted on 01/08/03 at 11:39 AM
(1)
Re: Evaporated Gold doesn't lift from Substrate, please advise. - Vacminho-Coatings and Surface Engineering, Ltd Posted on 01/30/03 at 5:02 PM
(0)
Cellulose Triacetate coatings - Brian Grochowski Posted on 01/03/03 at 2:35 PM
(3)
Re: Cellulose Triacetate coatings - engin karadag Posted on 04/13/03 at 2:16 PM
(0)
Re: Cellulose Triacetate coatings - shante peters Posted on 03/05/03 at 6:32 PM
(0)
Re: Cellulose Triacetate coatings - Donald Mattox Posted on 01/04/03 at 10:00 PM
(0)
NN2003-Nanomaterials and Nanotechnologies (Crete, Aug 30 - Sep. 6, 2003) - Vasco Teixeira Posted on 01/02/03 at 6:04 PM
(0)
McLeod Glass Gauge Head - Robin Whyte Posted on 01/01/03 at 9:36 AM
(1)
Re: McLeod Glass Gauge Head - Advance Laboratory Supplies Co Posted on 02/06/03 at 3:12 AM
(0)
Problem to sputter TiN for aluminum alloy substrate - Amy Smith Posted on 01/01/03 at 6:38 AM
(2)
Re: Problem to sputter TiN for aluminum alloy substrate - Shi Xu Posted on 07/09/03 at 3:05 AM
(0)
Re: Problem to sputter TiN for aluminum alloy substrate - Donald Mattox Posted on 01/07/03 at 3:19 PM
(0)
Vacuum Hose @ 130 Deg +C - Robin Whyte Posted on 12/30/02 at 3:10 PM
(1)
Re: Vacuum Hose @ 130 Deg +C - Pat McMahon Posted on 01/02/03 at 4:08 PM
(0)
high vacuum and leak rate; getters - George Grzybowski Posted on 12/29/02 at 3:24 PM
(0)
Small chamber wanted - Ken Hunter Posted on 12/23/02 at 3:16 PM
(2)
Re: Small chamber wanted - Pat McMahon Posted on 12/27/02 at 10:17 PM
(1)
Re: Small chamber wanted - Advance Laboratory Supplies Co Posted on 02/06/03 at 3:15 AM
(0)
work function of glass - Adam Para Posted on 12/23/02 at 4:18 AM
(0)
magnetism during evaporation - luuk Posted on 12/23/02 at 4:05 AM
(0)
vane material - Abhay Managavi Posted on 12/23/02 at 12:38 AM
(1)
Re: vane material - Wagner Richard Posted on 02/27/03 at 4:21 AM
(0)
Large vacuum chambers and Diff pumps for sale - Robert Dykhouse Posted on 12/20/02 at 6:26 PM
(3)
Re: Large vacuum chambers and Diff pumps for sale - Vacminho-Coatings and Surface Engineering Ltd Posted on 01/30/03 at 4:57 PM
(1)
Re: Large vacuum chambers and Diff pumps for sale - reed a. schmell Posted on 09/11/03 at 4:22 PM
(0)
Re: Large vacuum chambers and Diff pumps for sale - Pat McMahon Posted on 12/23/02 at 10:25 PM
(0)
Cheap PVD machine - Manlio Zaccarini Gotta Posted on 12/20/02 at 11:25 AM
(0)
corfom coating - Ashly Posted on 12/20/02 at 6:45 AM
(0)
Loading/unloading tooling - Vladimir Tchoutko Posted on 12/19/02 at 1:44 PM
(1)
Base coat & Top coat for VUM part - Thaweesak Muendech Posted on 05/14/03 at 7:02 AM
(0)
Dust - Chad Posted on 12/19/02 at 9:04 AM
(1)
Re: Dust - Garry Williams Posted on 12/28/02 at 8:36 PM
(0)
what to use improve the adhesion of aluminium coated (using vacuum metalizing process) on PC & PMMA without the use of base coat on the plastics - Y.H Wan Posted on 12/17/02 at 4:08 AM
(3)
Re: what to use improve the adhesion of aluminium coated (using vacuum metalizing process) on PC & PMMA without the use of base coat on the plastics - Donald Mattox Posted on 12/17/02 at 7:31 PM
(2)
Re: what to use improve the adhesion of aluminium coated (using vacuum metalizing process) on PC & PMMA without the use of base coat on the plastics - maryam Foroughi Posted on 09/02/03 at 1:20 PM
(0)
Re: what to use improve the adhesion of aluminium coated (using vacuum metalizing process) on PC & PMMA without the use of base coat on the plastics - VacMinho-Coatings and Surface Engineering Ltd. Posted on 01/02/03 at 5:50 PM
(0)
Customized Thin Film Technologies. - Vladimir Savenko Posted on 12/16/02 at 4:21 AM
(0)
tungsten heater for vacuum metallising - Jiang Hanns Posted on 12/11/02 at 3:52 AM
(0)
cvc 601 sputtering machine - Abhiram Govindaraju Posted on 12/08/02 at 7:39 AM
(4)
Re: cvc 601 sputtering machine - Vacminho-Coatings and Surface Engineering Ltd Posted on 01/30/03 at 5:13 PM
(0)
Re: cvc 601 sputtering machine - Donald Mattox Posted on 12/09/02 at 2:45 PM
(0)
Re: cvc 601 sputtering machine - Pat McMahon Posted on 12/08/02 at 9:42 PM
(1)
Re: cvc 601 sputtering machine - abhiram Govindaraju Posted on 01/27/03 at 4:49 PM
(0)
Glass Sheet 1 mm 800 deg C - N.C.Jain Posted on 12/06/02 at 7:58 PM
(1)
Re: Glass Sheet 1 mm 800 deg C - Vasco Teixeira Posted on 01/31/03 at 7:48 PM
(0)
Requesting Articles on Atmospheric Pressure Plasmas - Joseph Sudhakar Posted on 12/04/02 at 12:26 PM
(0)
Chrome Nitride PVD Chamber Required - Tim Lawrence Posted on 11/30/02 at 5:52 PM
(1)
Re: Chrome Nitride PVD Chamber Required - Vladimir Tchoutko Posted on 12/01/02 at 4:48 PM
(0)
Optical Monitor - Robert Welch Posted on 11/26/02 at 2:02 PM
(1)
Re: Optical Monitor - Arcady Griff Posted on 03/19/03 at 2:21 AM
(0)
need help: how to reduce the Na+ "contamination" - Cao Charles Posted on 11/26/02 at 8:47 AM
(0)
Diff pump oil Silicone vs others. - Chad Posted on 11/21/02 at 3:34 PM
(1)
Re: Diff pump oil Silicone vs others. - Steve Boza Posted on 11/23/02 at 11:02 PM
(0)
Fiber optic lead through - sarfaraz moh Posted on 11/20/02 at 1:37 PM
(0)
WANTED: Used vacuum metallizer - Chad Brooks Posted on 11/20/02 at 1:34 PM
(1)
Re: WANTED: Used vacuum metallizer - Luciano Posted on 07/11/03 at 7:28 PM
(0)
Gold coating on ITO - prakash Posted on 11/20/02 at 10:19 AM
(2)
Re: Gold coating on ITO - Donald Mattox Posted on 11/20/02 at 10:45 AM
(1)
Re: Gold coating on ITO - prakash Posted on 11/20/02 at 10:51 AM
(0)
AVS Monograph by John Vossen - Donald Mattox Posted on 11/19/02 at 3:03 PM
(0)
sealing compond for fibreglass and stainless steel for vacuum leak - Rajeev Abhang Posted on 11/16/02 at 3:06 PM
(2)
Re: sealing compond for fibreglass and stainless steel for vacuum leak - Dick Swisher Posted on 12/02/02 at 4:23 PM
(0)
Re: sealing compond for fibreglass and stainless steel for vacuum leak - Donald Mattox Posted on 11/16/02 at 3:41 PM
(0)
Need Used Vertial ULVAC Sputtering System - John Felts Posted on 11/16/02 at 12:46 AM
(0)
Sputtering Al - moshin Posted on 11/14/02 at 2:04 PM
(5)
Re: Sputtering +1torr - seied mohammad rezaei Posted on 06/06/03 at 1:36 AM
(0)
Re: Sputtering Al - pat McMahon Posted on 11/14/02 at 10:38 PM
(2)
Re: Sputtering Al - moshin Posted on 11/15/02 at 1:08 PM
(1)
Re: Sputtering Al - Pat McMahon Posted on 11/15/02 at 10:16 PM
(0)
Re: Sputtering Al - Doanld Mattox Posted on 11/14/02 at 8:20 PM
(0)
Aluminum Vacuum Brazing - Bill Kay Posted on 11/13/02 at 9:33 AM
(0)
Titanium Vaccum Chamber Lab - Tonya Mullenix Posted on 11/13/02 at 5:35 AM
(2)
Re: Titanium Vaccum Chamber Lab - Mian Iqbal Hasan Posted on 03/13/03 at 3:48 AM
(0)
Re: Titanium Vaccum Chamber Lab - Donald Mattox Posted on 11/13/02 at 11:09 AM
(0)
How to clean well the stainless steel vacuum chamber? - Hyunbin Kim Posted on 11/12/02 at 1:20 AM
(1)
Re: How to clean well the stainless steel vacuum chamber? - Pat McMahon Posted on 11/12/02 at 9:57 PM
(0)
Work function - Luis Lopes Posted on 11/11/02 at 8:14 PM
(4)
Re: Work function - Vladimir Tchoutko Posted on 11/13/02 at 5:21 PM
(3)
Re: Work function - iman Posted on 04/06/03 at 6:09 AM
(0)
ceramics with 10^9 volume resistivity - Luis Lopes Posted on 11/20/02 at 10:37 AM
(0)
chinese pyrex equivalent? - charlie Posted on 11/08/02 at 10:53 AM
(1)
SiO evaporation - Nathan Ritchie Posted on 11/07/02 at 6:29 AM
(8)
Re: SiO evaporation - Dick Swisher Posted on 11/14/02 at 5:11 PM
(0)
Re: SiO evaporation - Wojtek Posted on 11/07/02 at 9:36 AM
(6)
Re: SiO evaporation - Barry Pemberton Posted on 01/31/03 at 4:03 PM
(5)
Re: SiO evaporation - Wojtek Posted on 02/04/03 at 7:12 AM
(0)
Re: SiO evaporation - Wojtek Posted on 02/04/03 at 6:43 AM
(3)
Re: SiO and SiO2 evaporation - Alex Posted on 04/15/03 at 6:16 PM
(0)
Re: SiO evaporation - B. Pemberton Posted on 02/10/03 at 9:45 AM
(1)
Re: SiO evaporation - Wojtek Posted on 02/12/03 at 9:00 AM
(0)
diffusion pump - B.MATHEW Posted on 11/05/02 at 2:02 AM
(1)
Re: diffusion pump - Advance Laboratory Supplies Co Posted on 02/06/03 at 4:44 AM
(0)
how many types of pressures guages are there and how they work - sunil Posted on 11/04/02 at 5:24 PM
(3)
Re: how many types of pressures guages are there and how they work - Maciej Wojdak Posted on 11/06/02 at 6:53 AM
(2)
Re: how many types of pressures guages are there and how they work - sunil Posted on 11/06/02 at 4:26 PM
(1)
Re: how many types of pressures guages are there and how they work - jmakela Posted on 08/09/03 at 3:01 PM
(0)
Need help in mearsuring transmission for non-planar lens - charlie Posted on 11/04/02 at 4:27 PM
(2)
Re: Need help in mearsuring transmission for non-planar lens - Wojtek Posted on 11/05/02 at 10:01 AM
(1)
Re: It was so nice of you, Wojtek - charlie Posted on 11/05/02 at 2:40 PM
(0)
Need help with SiO2 sputtering - Tony Bollinger Posted on 11/03/02 at 4:10 PM
(2)
Re: Need help with SiO2 sputtering - Vladimir Savenko Posted on 12/16/02 at 4:06 AM
(0)
Re: Need help with SiO2 sputtering - Rob Belan Posted on 11/03/02 at 6:50 PM
(0)
how to vacuum coat on polycarbonate using titanium - johan south africa Posted on 10/31/02 at 12:56 PM
(2)
Re: how to vacuum coat on polycarbonate using titanium - Doanld Mattox Posted on 11/01/02 at 7:49 PM
(0)
Re: how to vacuum coat on polycarbonate using titanium - Doanld Mattox Posted on 11/01/02 at 7:49 PM
(0)
antiglare coating technology - raj arora Posted on 10/23/02 at 1:35 AM
(3)
anti-glare coating - Akif Mohammed Arif Mirza Posted on 10/13/03 at 11:43 AM
(0)
Re: antiglare coating technology - kailash nisal Posted on 06/30/03 at 6:11 AM
(0)
Re: antiglare coating technology - TImothy Cook Posted on 10/29/02 at 11:04 AM
(0)
1943 book on optical coatings - Donald Mattox Posted on 10/22/02 at 3:52 PM
(0)
PTFE coating - Harshad M. Trivedi Posted on 10/19/02 at 11:20 PM
(2)
Re: PTFE coating - Grytsenko Posted on 06/21/03 at 3:58 PM
(0)
Re: PTFE coating - VacMinho-Coatings and Surface Engineering ,Ltd Posted on 01/31/03 at 8:12 PM
(0)
who know how to inspect the irregularity by ZYGO? - Bruce Chu Posted on 10/17/02 at 10:13 AM
(1)
Re: - charlie Posted on 10/24/02 at 1:00 PM
(0)
rotary vane vacuum pump - Don Posted on 10/14/02 at 6:18 PM
(4)
Re: rotary vane vacuum pump - Timothy Cook Posted on 10/29/02 at 11:12 AM
(1)
Re: rotary vane vacuum pump maintainance manual - simon ondeng' Posted on 09/30/03 at 10:11 AM
(0)
Re: rotary vane vacuum pump - Donald Mattox Posted on 10/14/02 at 11:50 PM
(1)
Re: rotary vane vacuum pump - don Posted on 10/15/02 at 6:15 AM
(0)
ion and plasma sources for vacuum technologies - L. Gontcharov Posted on 10/04/02 at 2:25 AM
(0)
Beryllium evaporation - liam worth Posted on 10/03/02 at 11:11 AM
(2)
Re: Beryllium evaporation - Rob Belan Posted on 10/08/02 at 12:41 PM
(1)
Re: Beryllium evaporation - Donld Mattox Posted on 10/14/02 at 6:20 PM
(0)
Vacuum coating chamber wanted - Mike Pagano Posted on 10/01/02 at 1:40 PM
(4)
Re: Vacuum coating chamber wanted - Timothy Cook Posted on 10/29/02 at 10:57 AM
(0)
Re: Vacuum coating chamber wanted - Vladimir Tchoutko Posted on 10/04/02 at 8:42 AM
(1)
Re: Vacuum coating chamber wanted - Glenn Mueller Posted on 10/15/02 at 9:04 AM
(0)
Re: Vacuum coating chamber wanted - Graham Shullman Posted on 10/02/02 at 8:34 AM
(0)
vapor speed - jim moore Posted on 09/26/02 at 5:28 PM
(2)
Re: vapor speed - Donald Mattox Posted on 09/26/02 at 7:00 PM
(1)
Re: vapor speed - donald Mattox Posted on 09/27/02 at 10:08 AM
(0)
1920 book on making mirror surfaces - Don Mattox Posted on 09/23/02 at 1:37 PM
(4)
Re: 1920 book on making mirror surfaces - Dick Swisher Posted on 10/15/02 at 1:29 PM
(1)
Re: 1920 book on making mirror surfaces - Donald Mattox Posted on 10/15/02 at 6:17 PM
(0)
Re: 1920 book on making mirror surfaces - Pat McMahon Posted on 09/23/02 at 9:49 PM
(1)
Re: 1920 book on making mirror surfaces - Donald Mattox Posted on 09/23/02 at 11:25 PM
(0)
Metallizing companies in the midwest... - Graham Shullman Posted on 09/23/02 at 9:01 AM
(2)
Re: Metallizing companies in the midwest... - Jiang Hanns Posted on 10/22/02 at 9:16 PM
(0)
Re: Metallizing companies in the midwest... - Donald Mattox Posted on 09/23/02 at 10:00 AM
(0)
Rear View Manuafcturing plant - Dinesh Mor Posted on 09/22/02 at 1:10 PM
(4)
Re: Rear View Manuafcturing plant - Tmothy Cook Posted on 10/29/02 at 11:17 AM
(0)
Re: Rear View Manuafcturing plant - Jiang Hanns Posted on 10/22/02 at 9:17 PM
(0)
Re: Rear View Manuafcturing plant - Vladimir Tchoutko Posted on 09/24/02 at 12:42 PM
(0)
Re: Rear View Manuafcturing plant - Graham Shullman Posted on 09/23/02 at 8:59 AM
(0)
Do standard chambers work for metallizing mirrors? - graham Posted on 09/19/02 at 1:11 PM
(2)
Re: Do standard chambers work for metallizing mirrors? - Donald Mattox Posted on 09/19/02 at 2:49 PM
(1)
Re: Do standard chambers work for metallizing mirrors? - Graham Posted on 09/23/02 at 8:37 AM
(0)
looking for vacuum machine for poly propoline - Fudel abo sobeh Posted on 09/19/02 at 6:00 AM
(1)
Re: looking for vacuum machine for poly propoline - TImothy Cook Posted on 10/29/02 at 11:21 AM
(0)
Optical Design Software - Hemang Jesrani / Astro Optics Pvt. Ltd. Posted on 09/19/02 at 2:37 AM
(0)
Who can sell us arc-metallizing equipment? - Oksana Dikan Posted on 09/18/02 at 11:52 AM
(2)
OPTICAL VACUUM COATING AVAILABLE - Advance Laboratory Supplies Co Posted on 09/14/02 at 12:05 AM
(7)
Re: OPTICAL VACUUM COATING AVAILABLE - Aurelio Bazán Posted on 01/06/03 at 2:48 PM
(1)
Re: OPTICAL VACUUM COATING AVAILABLE - Advance Laboratory Supplies Co Posted on 02/06/03 at 4:44 AM
(0)
Re: OPTICAL VACUUM COATING AVAILABLE - Jiang Hanns Posted on 10/22/02 at 9:20 PM
(4)
Re: OPTICAL VACUUM COATING AVAILABLE - Advance Laboratory Supplies Co Posted on 10/23/02 at 3:24 AM
(3)
Re: OPTICAL VACUUM COATING AVAILABLE - SurajParkash Posted on 02/06/03 at 4:45 AM
(0)
Re: OPTICAL VACUUM COATING AVAILABLE - Adel Engineer Posted on 01/06/03 at 7:55 AM
(1)
Re: OPTICAL VACUUM COATING AVAILABLE - SurajParkash Posted on 01/06/03 at 11:11 AM
(0)
sputtered coatings on plastics - Vasco Teixeira Posted on 09/12/02 at 2:24 PM
(3)
Re: sputtered coatings on plastics - Linda Lipton Posted on 09/24/02 at 10:03 AM
(0)
Re: sputtered coatings on plastics - Rob Belan Posted on 09/13/02 at 12:50 PM
(0)
Re: sputtered coatings on plastics - Donald mattox Posted on 09/12/02 at 7:21 PM
(0)
Calibration of Mass Flow Controllers - Allan Knoll Posted on 09/12/02 at 8:12 AM
(9)
Re: Calibration of Mass Flow Controllers - Harvey Padden Posted on 12/16/02 at 11:16 AM
(0)
Re: Calibration of Mass Flow Controllers - Garry Williams Posted on 09/13/02 at 3:20 AM
(0)
Re: Calibration of Mass Flow Controllers - Donald Mattox Posted on 09/12/02 at 7:31 PM
(6)
Re: Calibration of Mass Flow Controllers - Pat McMahon Posted on 09/12/02 at 10:32 PM
(5)
Re: Calibration of Mass Flow Controllers - Donald Mattox Posted on 09/13/02 at 11:15 AM
(4)
Re: Calibration of Mass Flow Controllers - Donald Mattox Posted on 09/14/02 at 10:32 AM
(0)
Re: Calibration of Mass Flow Controllers - Donald Mattox Posted on 09/13/02 at 4:28 PM
(2)
Re: Calibration of Mass Flow Controllers - Allan Knoll Posted on 09/17/02 at 3:07 PM
(1)
Re: Calibration of Mass Flow Controllers - Bob Williams Posted on 11/05/03 at 7:44 PM
(0)
metal fuseable with Neutral Glass - SCIENTIFIC GLASS WORKS Posted on 09/11/02 at 4:59 PM
(4)
Re: metal fuseable with Neutral Glass - Donald Mattox Posted on 09/13/02 at 11:29 AM
(0)
Re: metal fuseable with Neutral Glass - Garry Williams Posted on 09/13/02 at 3:23 AM
(2)
Re: metal fuseable with Neutral Glass - Export Import Consortium Posted on 09/13/02 at 11:58 PM
(1)
Re: metal fuseable with Neutral Glass - Garry Willliams Posted on 09/14/02 at 11:36 AM
(0)
plasma assisted evaporation - YC Zhang Posted on 09/10/02 at 5:50 AM
(5)
Re: plasma assisted evaporation - Grytsenko Posted on 06/21/03 at 3:51 PM
(0)
Re: plasma assisted evaporation - Vladimir Tchoutko Posted on 09/10/02 at 3:28 PM
(0)
Re: plasma assisted evaporation - Donald Mattox Posted on 09/10/02 at 1:18 PM
(0)
Re: plasma assisted evaporation - Rob Belan Posted on 09/10/02 at 12:55 PM
(0)
Re: plasma assisted evaporation - Rob Belan Posted on 09/10/02 at 12:50 PM
(0)
History of vacuum coating (vacuum deposition) - Donald Mattox Posted on 09/07/02 at 6:57 PM
(1)
Re: History of vacuum coating (vacuum deposition) - garachou Posted on 03/16/03 at 8:49 PM
(0)
Epitaxial Platinum - Rob Belan Posted on 09/06/02 at 7:27 AM
(0)
Ion Plating - Piero Posted on 09/06/02 at 4:30 AM
(1)
Re: Ion Plating - Donald Mattox Posted on 09/06/02 at 10:48 AM
(0)
lubricant in high vacuum? Molykote? - Maciej Wojdak Posted on 09/03/02 at 10:17 AM
(2)
Re: lubricant in high vacuum? Molykote? - Donald Mattox Posted on 09/03/02 at 11:25 AM
(1)
Re: lubricant in high vacuum? Molykote? - Donald Mattox Posted on 09/07/02 at 12:21 PM
(0)
coating equipement for laquer discs - flo kaufmann Posted on 08/27/02 at 1:26 PM
(5)
Re: coating equipement for screws - RAJ KUMAR KHANDELWAL Posted on 09/06/03 at 11:43 AM
(0)
Re: coating equipement for laquer discs - traci langevin Posted on 09/11/02 at 5:46 PM
(0)
Re: coating equipement for laquer discs - Vladimir Tchoutko Posted on 08/28/02 at 2:31 PM
(0)
Re: coating equipement for laquer discs - Donald Mattox Posted on 08/27/02 at 5:57 PM
(0)
Re: coating equipement for laquer discs - Rob Belan Posted on 08/27/02 at 5:07 PM
(0)
darker colour problem in cr sputtering on glass - c.s.lee Posted on 08/26/02 at 1:23 AM
(2)
Re: darker colour problem in cr sputtering on glass - Donald Mattox Posted on 08/27/02 at 5:52 PM
(0)
Re: darker colour problem in cr sputtering on glass - Pat McMahon Posted on 08/26/02 at 10:17 PM
(0)
Can cbn be sputtered by reactive dc? - wilfred Posted on 08/22/02 at 8:35 AM
(0)
SVC Product and Services Directory - Donald Mattox Posted on 08/21/02 at 12:20 PM
(0)
Aluminium Vaccum Metallizing in Mexico? - Pedro Hernandez Posted on 08/19/02 at 7:03 PM
(5)
Re: Aluminium Vaccum Metallizing in Mexico? - Keith Faber Posted on 08/28/02 at 7:08 AM
(0)
Re: Aluminium Vaccum Metallizing in Mexico? - Donald Mattox Posted on 08/21/02 at 9:48 AM
(3)
Vaccum Metallizing Plant - Mohd Farhan Posted on 09/01/03 at 6:58 AM
(1)
Re: Vaccum Metallizing Plant - vikas bansal Posted on 11/03/03 at 10:55 AM
(0)
Re: Aluminium Vaccum Metallizing in Mexico? - Davinder Singh Khanuja Posted on 02/10/03 at 8:22 AM
(0)
Using diffusion pump systems for ARcoatings - Hemang Jesrani / Astro Optics Pvt. Ltd. Posted on 08/18/02 at 8:30 AM
(13)
Re: Using diffusion pump systems for ARcoatings - Semih ONCEL Posted on 11/07/02 at 4:13 AM
(0)
Re: Using diffusion pump systems for ARcoatings - Rob Belan Posted on 08/21/02 at 4:07 PM
(0)
Re: Using diffusion pump systems for ARcoatings - Garry Williams Posted on 08/21/02 at 4:14 AM
(0)
Re: Using diffusion pump systems for ARcoatings - Donald Mattox Posted on 08/19/02 at 12:23 PM
(1)
Re: Using diffusion pump systems for ARcoatings - zohreh rajabi Posted on 03/05/03 at 12:53 AM
(0)
Re: Using diffusion pump systems for ARcoatings - Pat McMahon Posted on 08/18/02 at 9:54 PM
(7)
Re: Using diffusion pump systems for ARcoatings - Hemang Jesrani / Astro Optics Pvt. Ltd. Posted on 08/19/02 at 12:42 AM
(6)
Re: Using diffusion pump systems for ARcoatings - Pat McMahon Posted on 08/20/02 at 10:17 PM
(5)
Re: Using diffusion pump systems for ARcoatings - Hemang Jesrani / Astro Optics Pvt. Ltd. Posted on 08/21/02 at 6:00 AM
(4)
Re: Using diffusion pump systems for ARcoatings - Pat McMahon Posted on 08/21/02 at 9:55 PM
(3)
Re: Using diffusion pump systems for ARcoatings - Hemang Jesrani / Astro Optics Pvt. Ltd. Posted on 08/28/02 at 7:33 AM
(2)
Re: Using diffusion pump systems for ARcoatings - Pat McMahon Posted on 09/02/02 at 10:58 PM
(1)
Re: Using diffusion pump systems for ARcoatings - Hemang Jesrani Posted on 09/19/02 at 2:26 AM
(0)
How do I negatively Bias a Substrate - Sony Varghese Posted on 08/17/02 at 12:21 PM
(2)
Re: How do I negatively Bias a Substrate - N.Afshari Posted on 12/10/02 at 6:18 AM
(0)
Re: How do I negatively Bias a Substrate - Vladimir Tchoutko Posted on 08/21/02 at 2:18 PM
(0)
Used vacuum coaters for sale - Oliver Schindelbeck Posted on 08/14/02 at 10:27 AM
(0)
How coatings can revolutionalized an industry? - Alex Yuan Posted on 08/14/02 at 9:48 AM
(4)
Re: How coatings can revolutionalized an industry? - Pat McMahon Posted on 08/14/02 at 10:07 PM
(0)
Re: How coatings can revolutionalized an industry? - Donald Mattox Posted on 08/14/02 at 11:03 AM
(2)
Re: How coatings can revolutionalized an industry? - Donald Mattox Posted on 08/14/02 at 11:15 AM
(1)
Re: How coatings can revolutionalized an industry? - Donald Mattox Posted on 08/14/02 at 11:18 AM
(0)
AEI magnetron drives - Peter Bahlk Posted on 08/12/02 at 5:24 AM
(0)
winding defect pet film - M.N.Subbarao Posted on 08/08/02 at 11:05 PM
(1)
Re: winding defect pet film - Donald Mattox Posted on 08/09/02 at 5:17 PM
(0)
VACUUM COATED MATERIALS - Advance Laboratory Posted on 08/08/02 at 2:21 PM
(1)
Re: VACUUM COATED MATERIALS - baggio Posted on 08/09/02 at 12:58 PM
(0)
Information on "Black Platinum" - Phil White Posted on 08/03/02 at 1:56 AM
(2)
Re: Information on "Black Platinum" - Donald Mattox Posted on 08/03/02 at 8:50 PM
(1)
Re: Information on "Black Platinum" - anil and Amit Posted on 08/09/03 at 3:53 AM
(0)
Leybold D60AC seized - Bruce Liu Posted on 08/02/02 at 10:40 PM
(0)
TiO2 - Al Zas Posted on 08/02/02 at 1:23 PM
(1)
Re: TiO2 - Dennis Posted on 08/07/02 at 10:22 AM
(0)
chirped mirrors - Al Zas Posted on 07/31/02 at 11:22 PM
(1)
Re: chirped mirrors - Donald Mattox Posted on 08/01/02 at 5:58 PM
(0)
IR mirror - Al Zas Posted on 07/31/02 at 11:18 PM
(3)
Re: IR mirror - Rob Belan Posted on 08/01/02 at 7:49 AM
(2)
Re: IR mirror - AL Zas Posted on 08/01/02 at 2:07 PM
(1)
Re: IR mirror - Rob Belan Posted on 08/01/02 at 2:10 PM
(0)
Calibration of Mass Flow Controllers - Allan Knoll Posted on 07/31/02 at 11:08 AM
(0)
Arc sputtering coating machine on stock - Vladimir Tchoutko Posted on 07/30/02 at 3:23 PM
(1)
Re: Arc sputtering coating machine on stock - Misbah Mazhar Posted on 01/04/03 at 2:09 AM
(0)
Looking for Alcatel Plasma Etching machines - Vladimir Tchoutko Posted on 07/30/02 at 2:49 PM
(1)
Re: Looking for Alcatel Plasma Etching machines - Vladimir Kossov Posted on 01/01/03 at 10:49 AM
(0)
cvd vs ebpvd - claude lavoie Posted on 07/29/02 at 2:56 PM
(0)
info needed on physics behind creating vacuum - Karthik Posted on 07/29/02 at 12:27 AM
(3)
Re: info needed on physics behind creating vacuum - Phil Danielson Posted on 07/29/02 at 5:16 PM
(0)
Re: info needed on physics behind creating vacuum - Donald Mattox Posted on 07/29/02 at 10:48 AM
(1)
Re: info needed on physics behind creating vacuum - Donald Mattox Posted on 07/29/02 at 10:51 AM
(0)
need help on obtaining crystalline boron oxide - boris Posted on 07/25/02 at 6:21 AM
(1)
Re: need help on obtaining crystalline boron oxide - melvin hollander Posted on 08/06/02 at 4:26 PM
(0)
Sputtering Targets - Robert Hall Posted on 07/22/02 at 11:48 PM
(1)
Re: Sputtering Targets - melvin hollander Posted on 08/06/02 at 4:28 PM
(0)
Re: Burning off Diamond like carbon coating? - Chandra Venkatraman Posted on 07/21/02 at 7:31 PM
(1)
Thank you and Ionbond, too - charlie Posted on 07/30/02 at 6:45 PM
(0)
Helium Pump down time - Anton De Beer Posted on 07/18/02 at 9:31 PM
(11)
Re: Helium Pump down time - slahuddin Posted on 11/22/02 at 12:24 AM
(0)
Re: Helium Pump down time - Phil Danielson Posted on 07/22/02 at 3:47 PM
(1)
Re: Helium Pump down time - Anton de Beer Posted on 07/22/02 at 4:31 PM
(0)
Re: Helium Pump down time - Phil Danielson Posted on 07/22/02 at 3:46 PM
(0)
Re: Helium Pump down time - Garry Williams Posted on 07/20/02 at 1:40 AM
(1)
Re: Helium Pump down time - Anton de Beer Posted on 07/20/02 at 3:35 AM
(0)
Re: Helium Pump down time - Pat McMaho Posted on 07/19/02 at 10:48 PM
(1)
Re: Helium Pump down time - Anton de Beer Posted on 07/21/02 at 3:49 AM
(0)
Re: Helium Pump down time - Donald Mattox Posted on 07/19/02 at 12:24 PM
(2)
Re: Helium Pump down time - Donald Mattox Posted on 08/27/02 at 10:52 AM
(0)
Re: Helium Pump down time - Anton de Beer Posted on 07/19/02 at 3:35 PM
(0)
spraying mirror coating - SHAIL BHANDARI Posted on 07/18/02 at 1:13 PM
(0)
Seeking vacuum metallizers in Southeast U.S. ??? - Denny Vasbinder Posted on 07/17/02 at 12:59 PM
(9)
Seeking vacuum metallizers in India - Ravi Verma Posted on 09/10/03 at 4:24 AM
(0)
Re: Seeking vacuum metallizers in Southeast U.S. ??? - MR. NARIN NARULA /PACKMAN VRNTURES BANGKOK THAILAND Posted on 08/24/03 at 7:16 AM
(0)
Re: Seeking vacuum metallizers in Southeast U.S. ??? - Keith Faber Posted on 08/28/02 at 7:19 AM
(1)
Re: Seeking vacuum metallizers in Asia - Maria Posted on 03/03/03 at 3:13 AM
(0)
Re: Seeking vacuum metallizers in Southeast U.S. ??? - Rob Belan Posted on 07/21/02 at 8:54 PM
(0)
Re: Seeking vacuum metallizers in Southeast U.S. ??? - Donald Mattox Posted on 07/19/02 at 12:17 PM
(0)
Re: Seeking vacuum metallizers in Southeast U.S. ??? - Donald Mattox Posted on 07/19/02 at 12:17 PM
(2)
Re: Seeking vacuum metallizers in Southeast U.S. ??? - Denny Vasbinder Posted on 07/19/02 at 12:37 PM
(1)
Re: Seeking vacuum metallizers in Southeast U.S. ??? - Glenn Mueller Posted on 10/15/02 at 9:14 AM
(0)
need help with ignition and stability of plasma (Perkin-Elmer 2400) - Maciej Wojdak Posted on 07/10/02 at 10:21 AM
(3)
Re: need help with ignition and stability of plasma (Perkin-Elmer 2400) - Pat McMahon Posted on 07/10/02 at 10:05 PM
(2)
Ad. ignition and stability of plasma (PE 2400) - Maciej Wojdak Posted on 07/11/02 at 6:26 AM
(1)
Re: Ad. ignition and stability of plasma (PE 2400) - Pat McMahon Posted on 07/11/02 at 10:11 PM
(0)
Hard Anti Reflection Coating on Spectacle lenses - Qaiser Raza Posted on 07/10/02 at 3:29 AM
(5)
Re: Hard Anti Reflection Coating on Spectacle lenses - anil Posted on 11/16/02 at 6:23 AM
(1)
Re: Hard Anti Reflection Coating on Spectacle lenses - anil Sharma Posted on 11/18/02 at 1:03 AM
(0)
Re: Hard Anti Reflection Coating on Spectacle lenses - Gangadhar Posted on 07/17/02 at 4:56 AM
(2)
Re: Hard Anti Reflection Coating on Spectacle lenses - Gangadhar Posted on 07/22/02 at 5:58 AM
(1)
Re: Hard Anti Reflection Coating on Spectacle lenses - Dennis Posted on 08/07/02 at 10:33 AM
(0)
electrode polishing - chris Posted on 07/08/02 at 4:40 PM
(0)
Need help: Amateur building a basic vacuum system. - John Trueman Posted on 07/08/02 at 1:31 AM
(3)
Re: Need help: Amateur building a basic vacuum system. - Djorovic Vladimir Posted on 12/26/02 at 6:49 AM
(0)
Re: Need help: Amateur building a basic vacuum system. - Dick Swisher Posted on 07/15/02 at 12:16 AM
(1)
Re: Need help: Amateur building a basic vacuum system. - John Trueman Posted on 07/15/02 at 11:23 PM
(0)
sputt. target - bonded or screwed? - Maciej Wojdak Posted on 07/04/02 at 11:05 AM
(0)
TaAl, AlSiCu, &AlCu Targets For Sale - Jared Akins Posted on 06/28/02 at 11:41 AM
(0)
Inexpensive Components, Fittings and Chambers - Timm Marienhagen Posted on 06/27/02 at 4:32 PM
(1)
Re: Vacuum Chambers - Yuri S.Protasov Posted on 03/28/03 at 11:03 AM
(0)
Requirement for large volume/size vacuum metalized Corporate Signs - beeckman Posted on 06/27/02 at 6:31 AM
(3)
Re: Requirement for large volume/size vacuum metalized Corporate Signs - shailesh bhandari Posted on 07/18/02 at 1:19 PM
(1)
Re: Requirement for large volume/size vacuum metalized Corporate Signs - Glenn Mueller Posted on 10/15/02 at 9:17 AM
(0)
Re: Requirement for large volume/size vacuum metalized Corporate Signs - chuck cathcart Posted on 07/01/02 at 2:06 PM
(0)
2 used vacuum coating units for sale model Zeiss B10 - oliver schindelbeck Posted on 06/24/02 at 9:39 AM
(0)
Information about temperature and vacuum - Luis Carlos Bernardi Posted on 06/19/02 at 5:20 PM
(1)
Re: Information about temperature and vacuum - Qihong Wu Posted on 06/30/02 at 8:07 PM
(0)
small orifice plasma loss - Robert L Gillooly Posted on 06/19/02 at 8:38 AM
(1)
Re: small orifice plasma loss - Allan Knoll Posted on 08/14/02 at 8:51 AM
(0)
hydrogen doped ttanium foil - don nelson Posted on 06/18/02 at 6:27 PM
(3)
Re: hydrogen doped ttanium foil - Donald mattox Posted on 06/21/02 at 1:27 PM
(0)
Re: hydrogen doped ttanium foil - Donald Mattox Posted on 06/21/02 at 11:16 AM
(0)
Re: hydrogen doped ttanium foil - Donald Mattox Posted on 06/21/02 at 10:49 AM
(0)
tape for masking part of the aluminum mirror ? - charlie Posted on 06/17/02 at 6:17 PM
(2)
Re: tape for masking part of the aluminum mirror ? - Donald Mattox Posted on 06/19/02 at 11:26 AM
(1)
Thanks, Don. - charlie Posted on 06/19/02 at 2:24 PM
(0)
ion current -vs- rate - jim moore Posted on 06/17/02 at 1:51 PM
(1)
Re: ion current -vs- rate - Donald Mattox Posted on 06/18/02 at 8:44 PM
(0)
Vacuum Coated Materials - Kamlesh Arora Posted on 06/16/02 at 2:44 AM
(0)
Vacuum Pumps, Mercury / Oil Diffion Pumps, Vacuum Equipments - SurajParkash Posted on 06/16/02 at 2:41 AM
(3)
Re: Vacuum Pumps, Mercury / Oil Diffion Pumps, Vacuum Equipments - hany barsoum Posted on 07/27/02 at 9:48 AM
(0)
Re: Vacuum Pumps, Mercury / Oil Diffion Pumps, Vacuum Equipments - dan feigenbaum Posted on 06/17/02 at 2:58 PM
(1)
Re: Vacuum Pumps, Mercury / Oil Diffion Pumps, Vacuum Equipments - Nijaz Ruhotuina Posted on 02/27/03 at 10:00 PM
(0)
How to evaporate Al. using Electrical Arc for metallizing purpose - M.Heidari Posted on 06/14/02 at 7:28 AM
(3)
Re: How to evaporate Al. using Electrical Arc for metallizing purpose - Donald Mattox Posted on 06/19/02 at 7:45 PM
(2)
theoretical study of electric arc - messaad brahim Posted on 12/09/02 at 4:08 AM
(0)
Re: How to evaporate Al. using Electrical Arc for metallizing purpose - chris busuttil Posted on 09/16/02 at 3:56 AM
(0)
A new vacuum equipment, optics and coatings web site - Vladimir Tchoutko Posted on 06/13/02 at 5:41 AM
(1)
Re: A new vacuum equipment, optics and coatings web site - dan feigenbaum Posted on 06/17/02 at 2:50 PM
(0)
Backflow of diffusing pump oil into vaccuum deposition chamber - C.S.Lee Posted on 06/12/02 at 4:20 AM
(4)
Re: Backflow of diffusing pump oil into vaccuum deposition chamber - Garry Williams Posted on 06/17/02 at 2:49 AM
(1)
Re: Backflow of diffusing pump oil into vaccuum deposition chamber - Donald Mattox Posted on 06/19/02 at 11:35 AM
(0)
Re: Backflow of diffusing pump oil into vaccuum deposition chamber - Pat McMahon Posted on 06/12/02 at 10:13 PM
(1)
Re: Backflow of diffusing pump oil into vaccuum deposition chamber - dan feigenbaum Posted on 06/17/02 at 2:54 PM
(0)
Darkness control of Cr coated glass - Lee,Choong Sang Posted on 06/12/02 at 2:30 AM
(3)
Re: Darkness control of Cr coated glass - Pat McMahon Posted on 06/12/02 at 10:18 PM
(0)
Re: Used Vacuum Metalizing Chamber - shailesh bhandari Posted on 07/18/02 at 1:09 PM
(2)
Re: Used Vacuum Metalizing Chamber - Robert Dykhouse Posted on 12/20/02 at 6:20 PM
(1)
Re: Used Vacuum Metalizing Chamber - Alastair Bennett Posted on 01/20/03 at 10:58 PM
(0)
E-Beam crucible liner for aluminium - chandana Posted on 06/07/02 at 12:21 AM
(9)
Re: E-Beam crucible liner for Nickle - tahir Posted on 10/21/02 at 7:23 AM
(7)
crystal - tahir Posted on 12/20/02 at 2:02 AM
(0)
crystal re use - Tahir Posted on 12/04/02 at 11:55 AM
(0)
Crystal - Tahir Posted on 12/04/02 at 11:47 AM
(0)
aluminium cleaning - TM Posted on 12/04/02 at 1:01 AM
(0)
Re: E-Beam crucible liner for Nickle - jim moore Posted on 11/21/02 at 2:14 PM
(2)
aluminium evaporation - Tahir Posted on 11/22/02 at 1:16 AM
(0)
Re: E-Beam crucible liner for aluminium - jim moore Posted on 06/17/02 at 1:56 PM
(0)
a-Si coating - Zhang Yuanchang Posted on 06/07/02 at 12:01 AM
(0)
I am seeking the vacuum thermal equipment for mercury and cadmium recycling - Johnny Guo Posted on 06/03/02 at 11:45 PM
(1)
Re: I am seeking the vacuum thermal equipment for mercury and cadmium recycling - Phillip White Posted on 06/04/02 at 9:02 AM
(0)
Electrically non conductive coating of metal sheets - Murali Posted on 05/31/02 at 12:36 AM
(1)
Re: Electrically non conductive coating of metal sheets - Mark Jarratt Posted on 06/10/02 at 8:44 AM
(0)
powder coating - eerisir Posted on 05/29/02 at 11:33 AM
(0)
Metallisation of Ultra High Molecular Weight Polyethylene - Maria Hastings Posted on 05/27/02 at 12:44 AM
(1)
Re: Metallisation of Ultra High Molecular Weight Polyethylene - M.N.Subbarao Posted on 08/13/02 at 11:00 AM
(0)
lubricants for vacuum pumps - jayant Posted on 05/26/02 at 7:20 AM
(0)
Vacuum Ion Mirror Coating for rigid contact lenses - Bruce Bayne FX Optical Labs Posted on 05/24/02 at 12:00 PM
(0)
PE-CVD Si coating on Alum - ROD Posted on 05/24/02 at 8:35 AM
(0)
plasma poymrization- RF equipment - Dr.P.Predeep Posted on 05/20/02 at 9:59 PM
(0)
trying to find a small vacuum coating business - David Montgomery Posted on 05/10/02 at 2:30 PM
(3)
Re: trying to find a small vacuum coating business - mike plaisted Posted on 06/14/02 at 6:18 PM
(1)
Re: trying to find a small vacuum coating business - David Montgomery Posted on 06/18/02 at 10:33 AM
(0)
Re: trying to find a small vacuum coating business - Garry Williams Posted on 05/14/02 at 1:23 AM
(0)
Vacuum Metalizing Chambers for Automotive industry - Chad Posted on 05/08/02 at 1:51 PM
(4)
Re: Vacuum Metalizing Chambers for Automotive industry - chuck cathcart Posted on 07/01/02 at 2:03 PM
(0)
Re: Vacuum Metalizing Chambers for Automotive industry - Mark Jarratt Posted on 06/10/02 at 8:42 AM
(0)
Re: Vacuum Metalizing Chambers for Automotive industry - Charlie Posted on 05/27/02 at 2:21 PM
(0)
Re: Vacuum Metalizing Chambers for Automotive industry - Graham Shullman Posted on 05/20/02 at 11:27 AM
(0)
Affordable Vac Metallizing Equipment - Karl Bell Posted on 05/08/02 at 2:05 AM
(2)
Re: Affordable Vac Metallizing Equipment - chuck cathcart Posted on 07/01/02 at 2:14 PM
(0)
Re: Affordable Vac Metallizing Equipment - Ted Van Vorous Posted on 05/19/02 at 8:29 PM
(0)
Looking for vacuum metallizing companies in the midwest.. - Graham Shullman Posted on 05/02/02 at 11:46 AM
(3)
Re: Looking for vacuum metallizing companies in the midwest.. - Timothy Cook Posted on 10/29/02 at 11:39 AM
(0)
Re: Looking for vacuum metallizing companies in the midwest.. - Donald M. Mattox Posted on 06/18/02 at 8:38 PM
(1)
Re: Looking for vacuum metallizing companies in the midwest.. - Graham Shullman Posted on 06/19/02 at 8:25 AM
(0)
[ Administrative Control Panel ]
