|
|
Main Menu
Find
[ Main Page ][ Current Board ][ Post Message ]
Forum of High Vacuum Technology/Processing/Coating
Information exchange on all phases of Vacuum Processing and Equipment including systems, evaporation, sputtering, measurement, melting, and related technologies. Moderator: Pat McMahon
Posting messages to the old boards has been disabled. Please use current board to post new messages. In the archives you could post followups still and make contribution to the knowledge base.
Need help in Vacuum Casting.General information-materials - Dimitris Karigiannis Posted on 08/03/01 at 5:07 AM
(4)
Re: Need help in Vacuum Casting.General information-materials - charlie Posted on 11/27/01 at 11:50 AM
(2)
Re: Need help in Vacuum Casting.General information-materials - Muhammad Shujaet Turab Posted on 05/03/02 at 3:35 PM
(0)
Re: Need help in Vacuum Casting.General information-materials - alavi Posted on 04/04/02 at 12:29 PM
(0)
Re: Need help in Vacuum Casting.General information-materials - charlie Posted on 08/22/01 at 10:56 AM
(0)
Corrosion Tests - George Posted on 08/01/01 at 11:56 AM
(5)
Re: statistics about Corrosion for any country - ghazi Posted on 02/25/02 at 12:56 PM
(0)
Re: Corrosion Tests - FRIL Posted on 08/11/01 at 6:18 PM
(0)
Re: Corrosion Tests - mike plaisted Posted on 08/07/01 at 6:44 AM
(2)
Re: Corrosion Tests - aladdin Posted on 05/16/02 at 10:49 AM
(0)
Ultra Pure Nickel Metal and Oxide - Clifford Purdy Posted on 07/31/01 at 8:28 PM
(1)
Re: Ultra Pure Nickel Metal and Oxide - Pat McMahon Posted on 12/27/01 at 3:03 PM
(0)
To FRIL of ra1ajw@hotmail.com - charlie Posted on 07/25/01 at 11:20 AM
(1)
Re: To FRIL of ra1ajw@hotmail.com - FRIL Posted on 08/11/01 at 6:21 PM
(0)
Needing info on company named Plasma Sciences, Inc. - Quennie Balidoy Posted on 07/24/01 at 9:47 PM
(4)
Re: Needing info on company named Plasma Sciences, Inc. - alf smith Posted on 03/19/02 at 6:16 AM
(0)
Re: Needing info on company named Plasma Sciences, Inc. - Bill Stanton Posted on 01/16/02 at 10:36 PM
(1)
Re: Needing info on company named Plasma Sciences, Inc. - piyanop subjareon Posted on 04/25/02 at 6:51 AM
(0)
Re: Needing info on company named Plasma Sciences, Inc. - anonymous Posted on 09/05/01 at 5:56 PM
(0)
What is the most popular PVD coated black colour coating on commercial products - Surasak Surinphong Posted on 07/23/01 at 1:38 AM
(4)
Re: What is the most popular PVD coated black colour coating on commercial products - FRIL Posted on 07/23/01 at 6:45 PM
(3)
please can you help me in glass coating to golden colour with nitrogen using titanium with arc method - irfan Posted on 03/12/02 at 10:07 AM
(1)
Re: May some one collaborate - Dr. Zafar Iqbal Posted on 04/07/02 at 4:09 AM
(0)
Re: What is the most popular PVD coated black colour coating on commercial products - Surasak Surinphong Posted on 07/24/01 at 2:12 PM
(0)
need help on aluminizing mirrors - charlie Posted on 07/18/01 at 2:20 PM
(8)
Thanks, ya' all - charlie Posted on 07/27/01 at 1:21 PM
(0)
Re: need help on aluminizing mirrors - Krishna Oruganti Posted on 07/25/01 at 1:39 PM
(2)
Re: need help on aluminizing mirrors - zahid dilnawaz Posted on 08/13/01 at 10:25 AM
(1)
Re: need help on aluminizing mirrors - DavidChou Posted on 11/18/01 at 10:01 PM
(0)
Re: need help on aluminizing mirrors - FRIL Posted on 07/21/01 at 6:56 PM
(3)
Re: need help on aluminizing mirrors - charlie Posted on 07/23/01 at 4:50 PM
(2)
Re: need help on aluminizing mirrors - FRIL Posted on 07/24/01 at 10:17 AM
(1)
Re: need help on aluminizing mirrors - Jim arps Posted on 07/24/01 at 12:51 PM
(0)
Current flow in a vacuum vs. current flow in cryogenic material - Bob Reichenbach Posted on 07/15/01 at 12:25 AM
(6)
Re: Current flow in a vacuum vs. current flow in cryogenic material - bob reichenbach Posted on 12/31/01 at 2:19 PM
(0)
Re: Current flow in a vacuum vs. current flow in cryogenic material - Pat McMahon Posted on 12/21/01 at 10:43 PM
(0)
Re: Current flow in a vacuum vs. current flow in cryogenic material - Pat McMahon Posted on 12/19/01 at 10:47 PM
(2)
Re: Current flow in a vacuum vs. current flow in cryogenic material - Pat McMahon Posted on 12/20/01 at 4:07 PM
(1)
Re: Current flow in a vacuum vs. current flow in cryogenic material - Pat McMahon Posted on 12/20/01 at 11:24 PM
(0)
Re: Current flow in a vacuum vs. current flow in cryogenic material - Igor Burov Posted on 07/15/01 at 3:21 PM
(0)
ITO or SnO2 on PMMA? - Ray Boxman Posted on 07/13/01 at 4:00 AM
(3)
Re: ITO or SnO2 on PMMA? - Clifford Purdy Posted on 07/31/01 at 7:31 PM
(2)
Re: ITO or SnO2 on PMMA? - Vasco Teixeira Posted on 09/11/01 at 4:27 AM
(1)
Re: ITO or SnO2 on PMMA? - Vladimir Tchoutko Posted on 10/12/01 at 6:33 PM
(0)
solenoid for 90-degree filter - Igor Burov Posted on 07/02/01 at 2:53 PM
(2)
Re: solenoid for 90-degree filter - FRIL Posted on 07/21/01 at 6:20 PM
(0)
Re: solenoid for 90-degree filter - Surasak Surinphong Posted on 07/04/01 at 1:29 PM
(0)
Are there other discussion sites like this? - charlie smith Posted on 06/28/01 at 6:06 PM
(0)
coating machine for our astronomy club - muhd Posted on 06/28/01 at 3:46 AM
(6)
Re: coating machine for our astronomy club - Krishna Oruganti Posted on 07/02/01 at 2:41 PM
(5)
Re: coating machine for our astronomy club - ogry Posted on 12/28/01 at 4:45 PM
(0)
Re: coating machine for our astronomy club - i.e.i - e.o.d Posted on 08/16/01 at 1:28 AM
(3)
Re: coating machine for our astronomy club - reza Posted on 05/09/02 at 8:10 AM
(0)
Re: coating machine for our astronomy club - habib Posted on 03/22/02 at 4:38 PM
(1)
Re: coating machine for our astronomy club - ADR Engineering Posted on 03/27/02 at 12:18 AM
(0)
Vacuum and Flow measurement relativly. - H-Arabi Posted on 06/26/01 at 7:25 AM
(4)
Re: Vacuum and Flow measurement relativly. - HENRY RODRIGUEZ Posted on 11/27/01 at 10:01 AM
(0)
Re: Vacuum and Flow measurement relativly. - Howard Tring Posted on 08/27/01 at 8:45 AM
(2)
Re: Vacuum and Flow measurement relativly. - Mojtaba Fayyaz Posted on 03/06/02 at 2:02 PM
(1)
Re: Vacuum and Flow measurement relativly. - Howard tring Posted on 03/11/02 at 9:27 AM
(0)
How many kinds of sputtering machines ? - Eric Posted on 06/25/01 at 7:49 PM
(5)
Re: How many kinds of sputtering machines ? - ERIAN AMIN Posted on 04/04/02 at 6:59 PM
(1)
Re: How many kinds of sputtering machines ? - Dr. Zafar Iqbal Posted on 04/07/02 at 4:13 AM
(0)
Re: How many kinds of sputtering machines ? - Donald Mattox Posted on 03/11/02 at 1:13 PM
(0)
Re: How many kinds of sputtering machines ? - Rick Posted on 10/01/01 at 11:20 PM
(0)
Non-conductive Metal-like Coating - H.S.Han Posted on 06/24/01 at 7:55 PM
(15)
Re: Non-conductive Metal-like Coating - Krishna Oruganti Posted on 07/08/01 at 8:44 PM
(1)
Re: Non-conductive Metal-like Coating - H.S.Han Posted on 07/09/01 at 8:47 PM
(0)
Re: Non-conductive Metal-like Coating - Uwe Krause Posted on 07/08/01 at 6:08 AM
(12)
Non-conductive metal-like coating made by vacuum metallization - H.S.Han Posted on 07/08/01 at 8:47 PM
(11)
THANK - MUHAMMAD JAMIL Posted on 07/16/01 at 9:14 AM
(0)
PLASTIC VACUUM BASE AND TOP COATING - MUHAMMAD JAMIL Posted on 07/15/01 at 12:42 PM
(8)
vacuum coating(metallizing) machine - Hardik khant Posted on 12/24/01 at 7:58 AM
(1)
Re: vacuum coating(metallizing) machine - Rajen Shah Posted on 03/22/02 at 7:08 AM
(0)
vacuum coating(metallizing) machine - Hardik khant Posted on 12/24/01 at 7:58 AM
(2)
COMPLAINT AGAINST A COUSTOMER - ARIJIT GUIN Posted on 03/23/02 at 9:49 AM
(0)
COMPLAINT AGAINST A COUSTOMER - ARIJIT GUIN Posted on 03/23/02 at 9:48 AM
(0)
vacuum coating(metallizing) machine - Hardik khant Posted on 12/24/01 at 7:58 AM
(0)
vacuum coating(metallizing) machine - Hardik khant Posted on 12/24/01 at 7:58 AM
(0)
Re: PLASTIC VACUUM BASE AND TOP COATING - Muhammad Hamideh Posted on 08/30/01 at 12:08 PM
(0)
Re: Non-conductive metal-like coating made by vacuum metallization - Uwe Krause Posted on 07/13/01 at 5:20 AM
(0)
sputtering parameters for Al and Cr - steve nicoletti Posted on 06/22/01 at 9:06 AM
(1)
Re: sputtering parameters for Al and Cr - Robert Choquette Posted on 06/22/01 at 3:28 PM
(0)
Looking for USED MBE Chamber - Dr. Michael Carmody Posted on 06/19/01 at 5:32 PM
(1)
Re: Looking for USED MBE Chamber - Howard Tring Posted on 08/27/01 at 8:48 AM
(0)
Vacuum deposition of aluminium on PET film - Colin Smith Posted on 06/18/01 at 1:42 PM
(1)
Try to use Flourine Plastic Film. - H.S.Han Posted on 06/24/01 at 8:06 PM
(0)
looking for a Edwards E09 diffusion pump - Vittorio Fiorin Posted on 06/18/01 at 10:53 AM
(3)
Re: looking for a Edwards E09 diffusion pump - Howard Tring Posted on 08/27/01 at 8:51 AM
(2)
Re: looking for a Edwards E09 diffusion pump - hamid dahaghin Posted on 03/11/02 at 5:45 AM
(1)
Re: looking for a Edwards E09 diffusion pump - ADR Engineering Posted on 03/27/02 at 12:29 AM
(0)
Looking for TiN micro-hardness measurment - Mike Posted on 06/17/01 at 11:15 PM
(2)
Re: Looking for TiN micro-hardness measurment - Eugene Posted on 06/18/01 at 1:54 AM
(1)
Re: Looking for TiN micro-hardness measurment - Miss Haswipa Maimon Posted on 02/10/02 at 10:05 AM
(0)
Technical data for Carcinotron CO 63A - James B. Gibb Posted on 06/16/01 at 10:11 AM
(0)
Vacuum Pump Directory for UK suppliers - Paul Hardingham Posted on 06/15/01 at 6:39 AM
(1)
Re: Vacuum Pump Directory for UK suppliers - F.A.Firoje Posted on 05/04/02 at 10:55 PM
(0)
obselete sputtering machines - eugene Posted on 06/05/01 at 3:06 AM
(1)
Re: obselete sputtering machines - Dee Posted on 07/21/01 at 9:37 AM
(0)
DC-motors for use in high vacuum systems existing? - Caspar Bruineman Posted on 06/01/01 at 2:56 PM
(0)
Coating plastics/glass - Linda Bonwill Posted on 05/21/01 at 2:42 PM
(10)
Re: Coating plastics/glass - Miguel Calderon Posted on 03/26/02 at 2:25 PM
(0)
Re. Tin Oxide coating on 12" X 12" glass substrate - H.S.SHRINIVASA Posted on 12/25/01 at 2:15 AM
(2)
Re: Re. Tin Oxide coating on 12" X 12" glass substrate - H.S.SHRINIVASA Posted on 12/30/01 at 8:36 AM
(1)
Re: Re. Tin Oxide coating on 12" X 12" glass substrate - Taras Lisouski Posted on 03/12/02 at 2:52 AM
(0)
Re: Coating /glass - latik Posted on 12/14/01 at 10:44 AM
(1)
Re: Coating /glass - Taras Lisouski Posted on 03/12/02 at 2:42 AM
(0)
Re: Coating plastics/glass - QAISER JHAHNGIR Posted on 09/23/01 at 2:03 PM
(1)
Re: Coating plastics/glass - Uppili Raghavan Posted on 12/12/01 at 1:11 AM
(0)
Re: Coating plastics/glass - morteza rohih Posted on 08/04/01 at 4:42 PM
(0)
Re: Coating plastics/glass - wisnu Posted on 06/09/01 at 4:35 AM
(0)
how much vacuum (in. hg.) to supress combustion - mike Posted on 04/30/01 at 10:03 AM
(0)
Fixtures: Ultrasonic Cleaners to the Chamber - Elizabeth Mahler Posted on 04/28/01 at 1:19 PM
(2)
Re: Fixtures: Ultrasonic Cleaners to the Chamber - Rob Belan Posted on 05/01/01 at 11:40 AM
(1)
Re: Fixtures: Ultrasonic Cleaners to the Chamber - Angel Posted on 05/06/02 at 2:46 AM
(0)
Coating conference in Tenerife Island - Vasco Teixeira Posted on 04/24/01 at 1:05 PM
(0)
Vacuum Impregnation System - Nick Haviland Posted on 04/24/01 at 8:12 AM
(3)
Re: Vacuum Impregnation System - CYRIL MENEZES, MANAGER, UNITED ELECT.NETWORK Posted on 11/17/01 at 1:42 AM
(0)
Re: Vacuum Impregnation System - Muhammad Abdullah Posted on 07/04/01 at 12:24 AM
(1)
Re: Vacuum Impregnation System - naser alrawi Posted on 12/12/01 at 5:19 AM
(0)
Thermal emmitance of thin films and coatings produced by sputtering - Vasco Teixeira Posted on 04/20/01 at 5:21 PM
(2)
Re: Thermal emmitance of thin films and coatings produced by sputtering - Dick Swisher Posted on 05/26/01 at 4:08 PM
(1)
Re: Thermal emmitance of thin films and coatings produced by sputtering - Sana Ullah Posted on 06/05/02 at 2:34 AM
(0)
interference fringes technique for stress measurment - benyounes elmrabat Posted on 04/18/01 at 12:56 PM
(3)
Re: interference fringes technique for stress measurment - Vasco Teixeira Posted on 04/20/01 at 5:40 PM
(2)
Re: interference fringes technique for stress measurment - Benyounes Elmrabat Posted on 05/02/01 at 2:50 PM
(1)
Re: interference fringes technique for stress measurment - ahmet dogan Posted on 09/25/01 at 9:30 AM
(0)
Research Technician Available - Evelyn Cruz Posted on 04/17/01 at 7:48 PM
(0)
Si deposition - Andrew Eckhardt Posted on 04/17/01 at 9:02 AM
(3)
Re: Si deposition - Evelyn Cruz Posted on 04/17/01 at 8:11 PM
(2)
Re: Si deposition - Lev Stessin Posted on 06/20/01 at 9:13 AM
(0)
Re: Si deposition - Vasco Teixeira Posted on 04/20/01 at 5:28 PM
(0)
Conductance of tubing - Janice Posted on 04/12/01 at 2:11 PM
(3)
Re: Conductance of tubing - Jim Scheppele Posted on 05/07/01 at 5:25 PM
(0)
Re: Conductance of tubing - Howard tring Posted on 04/13/01 at 4:21 PM
(1)
Re: Conductance of tubing - Janice Posted on 04/20/01 at 9:59 AM
(0)
Entery Thin Film Information - Keith Posted on 04/11/01 at 12:00 PM
(1)
Re: Entery Thin Film Information - Leandro A. Testa Posted on 05/17/02 at 9:50 AM
(0)
Vacuum Technology textbook - Nigel Harris Posted on 04/10/01 at 3:31 AM
(9)
Re: Vacuum Technology textbook - wisnu Posted on 06/09/01 at 4:44 AM
(2)
Re: Vacuum Technology textbook - Md.Mahfujur Rahman Posted on 05/07/02 at 7:11 AM
(0)
Re: Vacuum Technology textbook - Edward Lee Posted on 04/25/01 at 12:36 PM
(5)
Re: Vacuum Technology textbook - Warren Adams Posted on 06/20/01 at 2:21 PM
(1)
Re: Vacuum Technology textbook - prasanna Posted on 02/25/02 at 12:53 AM
(0)
Re: Vacuum Technology textbook - Nigel Harris Posted on 04/30/01 at 5:44 AM
(2)
Re: Vacuum Technology textbook - Julfikar haider Posted on 05/16/01 at 12:47 PM
(1)
Re: Vacuum Technology textbook - Nigel Harris Posted on 05/18/01 at 2:51 AM
(0)
USED MBE System - Mike Carmody Posted on 04/06/01 at 5:58 PM
(0)
Machine and mould costs - Wesley Whitmore Posted on 03/31/01 at 7:46 AM
(0)
Basic Vacuum Technology Articles and Book Reviews - Phil Danielson Posted on 03/27/01 at 9:43 AM
(0)
General Overview of vacuum deposition - Patrick Rattigan Posted on 03/13/01 at 8:47 AM
(3)
Re: General Overview of vacuum deposition - ali mousavi Posted on 04/09/01 at 10:37 PM
(2)
Re: General Overview of vacuum deposition - supriya tiwari Posted on 08/03/01 at 10:39 PM
(1)
vaccum technology in process industries - ranu mamahdelay Posted on 02/05/02 at 4:27 AM
(0)
blue layer with balanced magnetron sputtering - Sandner Wilhelm Posted on 03/09/01 at 2:06 PM
(5)
Re: blue layer using Arc coating process - Dr.Zafar Iqbal Posted on 04/07/02 at 3:58 AM
(0)
Re: blue layer with balanced magnetron sputtering - mike plaisted Posted on 07/24/01 at 8:14 AM
(0)
Re: blue layer with balanced magnetron sputtering - Michael McKeown Posted on 03/15/01 at 7:17 AM
(2)
Re: blue layer with balanced magnetron sputtering - ali mousavi Posted on 04/09/01 at 10:40 PM
(1)
Re: blue layer with balanced magnetron sputtering - Vasco Teixeira Posted on 04/20/01 at 5:46 PM
(0)
A hump in Zerbst plot of C-t measurment !!!! - Benyounes Elmrabat Posted on 03/08/01 at 12:52 PM
(0)
Aluminium Evaporation - Ash Larthwell Posted on 02/22/01 at 10:25 AM
(3)
Re: Aluminium Evaporation - MIKE PLAISTED Posted on 02/27/01 at 7:15 AM
(2)
Re: Aluminium Evaporation - Dick Swisher Posted on 05/26/01 at 4:17 PM
(0)
Re: Aluminium Evaporation - Evelyn Cruz Posted on 04/18/01 at 1:31 PM
(0)
China Vacuum Coating Machines is OK or not? - H.S.Han Posted on 02/22/01 at 2:21 AM
(7)
Re: China Vacuum Coating Machines is OK or not? - H.S.Han Posted on 06/24/01 at 7:33 PM
(1)
Re: China Vacuum Coating Machines is OK or not? - Nadir Osman Posted on 05/25/02 at 11:02 PM
(0)
Re: China Vacuum Coating Machines is OK or not? - Andrew Mitchell Posted on 06/23/01 at 8:00 AM
(0)
Re: China Vacuum Coating Machines is OK or not? - Fang Liwu Posted on 04/22/01 at 6:13 PM
(2)
Re: China Vacuum Coating Machines is OK or not? - miguel calderon Posted on 03/26/02 at 2:49 PM
(0)
Re: China Vacuum Coating Machines is OK or not? - Robert Choquette Posted on 06/22/01 at 3:42 PM
(0)
DC sputter Si - Tom Posted on 02/20/01 at 11:44 PM
(5)
Re: DC sputter Si - Robert choquette Posted on 06/22/01 at 3:45 PM
(0)
Re: DC sputter Si - Rob Belan Posted on 02/27/01 at 11:34 AM
(0)
Re: DC sputter Si - mike plaisted Posted on 02/27/01 at 8:31 AM
(0)
Re: DC sputter Si - U. Krause Posted on 02/21/01 at 7:58 AM
(0)
Re: DC sputter Si - U. Krause Posted on 02/21/01 at 7:55 AM
(0)
Job Opportunity - Thomas Madden Posted on 02/14/01 at 4:19 PM
(2)
Re: Job Opportunity - Ebrahim Taheri Posted on 05/08/01 at 1:35 AM
(1)
Re: Job Opportunity - haitham abdel magid Posted on 10/28/01 at 9:29 AM
(0)
R&D Magazine Vacuum Column - Phil Danielson Posted on 02/14/01 at 3:32 PM
(4)
question - richard Posted on 11/14/01 at 5:37 PM
(0)
Re: R&D Magazine Vacuum Column - Tim Wheeler Posted on 07/16/01 at 3:42 PM
(1)
Re: R&D Magazine Vacuum Column - alavi Posted on 04/04/02 at 12:34 PM
(0)
Re: R&D Magazine Vacuum Column - Mark Scheidemantel Posted on 03/13/01 at 4:50 PM
(0)
vacuum ring? - jerry lacrosse Posted on 02/09/01 at 10:26 PM
(0)
CO2 Filter? - Matt K Posted on 02/05/01 at 12:36 AM
(1)
Re: CO2 Filter? - Hossein Salatin Posted on 03/19/02 at 5:10 PM
(0)
amatuer vacuum pump - cedric jeanty Posted on 02/04/01 at 2:42 PM
(2)
Re: amatuer vacuum pump - Chemy-guy Posted on 09/22/01 at 4:07 AM
(0)
Re: amatuer vacuum pump - John Posted on 07/02/01 at 10:45 PM
(0)
Calling All Sputtering Engineers - Sharon Paterson Posted on 01/18/01 at 4:31 PM
(1)
Re: Calling All Sputtering Engineers - Valery Dimov Posted on 03/01/02 at 3:38 AM
(0)
Extracting refractive indices / Flowmeter - Hemang Jesrani Posted on 01/12/01 at 8:41 AM
(0)
Vacuum Coating Equipment Engineer - Shekar Posted on 01/05/01 at 1:18 PM
(2)
Re: Vacuum Coating Equipment Engineer - shekar Posted on 02/19/02 at 8:34 AM
(0)
Re: Vacuum Coating Equipment Engineer - Valery Dimov Posted on 02/19/02 at 7:01 AM
(0)
Vacuum stainless steel tank - Tony Reem Posted on 01/04/01 at 5:50 PM
(8)
Re: Vacuum stainless steel tank - Silvia Johnson Posted on 03/05/01 at 11:25 PM
(7)
Re: Vacuum stainless steel tank - Howard Tring Posted on 04/19/01 at 2:23 PM
(1)
Re: Vacuum stainless steel tank - N. Jaber Posted on 03/08/01 at 10:49 AM
(4)
Re: Vacuum stainless steel tank - Evelyn Cruz Posted on 04/18/01 at 1:33 PM
(3)
Re: Vacuum stainless steel tank - Basil H. Armoush Posted on 08/19/01 at 4:48 AM
(1)
Re: Vacuum stainless steel tank - Evelyn Cruz Posted on 08/24/01 at 9:27 AM
(0)
Re: Vacuum stainless steel tank - N. Jaber Posted on 04/18/01 at 2:18 PM
(0)
Thermal Spray Engineer Job Opening, Columbus, OH - Jim Tisdall Posted on 12/20/00 at 2:14 PM
(0)
superlattices - John B. Posted on 12/19/00 at 7:50 AM
(0)
constructing a coating chamber - s.campbell Posted on 12/19/00 at 3:56 AM
(2)
Re: constructing a coating chamber - Howard Tring Posted on 04/19/01 at 2:29 PM
(0)
Re: constructing a coating chamber - Luis A. de Prado Posted on 02/15/01 at 3:36 AM
(0)
Vacuum training courses in UK - Willett Techical Services Vacuum Training Posted on 12/15/00 at 10:23 AM
(5)
Re: Vacuum training courses in UK - Willett Posted on 08/22/01 at 10:08 AM
(0)
enquiries@willetttechnical.freeserve.co.uk - A/.Willett Posted on 08/22/01 at 10:05 AM
(0)
Re: Vacuum training courses in UK - Howard Tring Posted on 04/10/01 at 7:35 AM
(0)
Re: Vacuum training courses in UK - Woody Posted on 02/08/01 at 3:13 PM
(1)
Re: Vacuum training courses in UK - Willett Technical Posted on 11/12/01 at 11:03 AM
(0)
Scientist / Process Engineer - ITO experience required - Nancy Posted on 12/12/00 at 5:08 PM
(2)
Re: Scientist / Process Engineer - ITO experience required - S.Srinivasulu Posted on 04/16/01 at 6:42 AM
(1)
Re: Scientist / Process Engineer - ITO experience required - S.srinivasulu Posted on 05/26/01 at 7:13 AM
(0)
Vacuum Coating Specialist Position - Guy Pulsifer Posted on 11/09/00 at 12:38 PM
(1)
Re: Vacuum Coating Specialist Position - Valery Dimov Posted on 03/19/02 at 4:58 AM
(0)
Design of electrodes for glow discharge cleaning - Ivan Culaba Posted on 11/09/00 at 5:27 AM
(1)
Re: Design of electrodes for glow discharge cleaning - FRIL Posted on 07/22/01 at 6:13 PM
(0)
welding for vacuum vessels - Stefano Marchi Posted on 10/31/00 at 8:42 AM
(2)
Re: welding for vacuum vessels - Howard Tring Posted on 04/12/01 at 1:45 PM
(0)
Re: welding for vacuum vessels - Rick Seboldt Posted on 02/20/01 at 7:43 AM
(0)
Elastomers for CVD - Dave Wong Posted on 10/29/00 at 10:27 AM
(0)
PVD Tools Coater in Thailand - Surasak Surinphong Posted on 10/18/00 at 10:01 AM
(2)
Re: PVD Tools Coater in Thailand - Surasak Surinphong Posted on 07/04/01 at 1:07 PM
(0)
Re: PVD Tools Coater in Thailand - Muhammad bin Abdullah Posted on 07/03/01 at 2:50 AM
(0)
Lubricants for diffusion pumps, ultra high vacuum, temperature, etc. - Michael S. Bemiss Posted on 10/18/00 at 12:54 AM
(4)
Re: Lubricants for diffusion pumps, ultra high vacuum, temperature, etc. - Howard Tring Posted on 04/12/01 at 1:48 PM
(3)
Re: Lubricants for diffusion pumps, ultra high vacuum, temperature, etc. - Michael S. Bemiss Posted on 04/12/01 at 2:37 PM
(2)
Re: Lubricants for diffusion pumps, ultra high vacuum, temperature, etc. - Howard Tring Posted on 04/12/01 at 2:53 PM
(1)
Re: Lubricants for diffusion pumps, ultra high vacuum, temperature, etc. - Michael S. Bemiss Posted on 04/12/01 at 3:41 PM
(0)
Vacuum coating wood products with stain/paint - Nicholas Heins Posted on 10/17/00 at 9:01 AM
(3)
Re: Vacuum coating wood products with stain/paint - Tim Wheeler Posted on 07/16/01 at 3:59 PM
(0)
Re: Vacuum coating wood products with stain/paint - Rick Seboldt Posted on 02/20/01 at 7:48 AM
(1)
Re: Vacuum coating wood products with stain/paint - Howard Tring Posted on 04/12/01 at 1:57 PM
(0)
e-beam evaporation of Al - C-A Berseth Posted on 10/08/00 at 4:27 PM
(3)
Re: e-beam evaporation of Al - phil Posted on 11/19/00 at 4:31 PM
(2)
Re: e-beam evaporation of Al - Howard Tring Posted on 04/12/01 at 2:00 PM
(1)
Re: e-beam evaporation of Al - Jeff Epstein Posted on 12/13/01 at 5:19 PM
(0)
Ni-Al coating on Si - laurent Posted on 10/03/00 at 10:11 AM
(0)
cvc ast304 sputtering system does any one know about the ferrofluidic seal? - Yarden Tsach Posted on 09/27/00 at 3:40 PM
(1)
Re: cvc ast304 sputtering system does any one know about the ferrofluidic seal? - Rick Seboldt Posted on 02/20/01 at 8:01 AM
(0)
chamber pumping - Rob Pierce Posted on 09/13/00 at 11:32 AM
(6)
Re: chamber pumping - phillip rogers Posted on 12/04/00 at 12:52 PM
(0)
Re: chamber pumping - merle hirsh Posted on 09/15/00 at 5:48 PM
(1)
Re: chamber pumping - Rob Pierce Posted on 09/21/00 at 8:18 PM
(0)
Re: chamber pumping - Frank Placido Posted on 09/15/00 at 5:36 PM
(2)
Re: chamber pumping - Jim Tisdall Posted on 12/20/00 at 2:26 PM
(0)
WTB Vauum Pump, Gauges, etc - Jeff Hutchinson Posted on 09/09/00 at 4:32 PM
(2)
Hall measurements on conductive thin films - Espinós, J.P. Posted on 08/23/00 at 10:27 PM
(9)
Measurements on TCO conductive thin films - Rafael Ciloci Posted on 04/19/02 at 1:22 PM
(0)
Re: Hall measurements on conductive thin films - Francisco Javier Manjon Posted on 11/24/01 at 8:32 AM
(0)
Re: Hall measurements on conductive thin films - Francisco Javier Manjon Posted on 11/24/01 at 8:31 AM
(0)
electirical rezistivity of ZnO and ZnO: Al thin films - Tulin Eroglu Posted on 03/22/01 at 2:30 PM
(3)
Properties of ZnO and doped ZnO thin films - Oleg Posted on 04/17/02 at 7:46 AM
(1)
Chemical depositions of CuO thin films - Vasea Julea Posted on 04/17/02 at 8:32 AM
(0)
Re: electirical rezistivity of ZnO and ZnO: Al thin films - kutlu Posted on 06/08/01 at 8:39 AM
(0)
Boron Oxide and Boric Acid - H.G. Fuss Posted on 08/19/00 at 6:08 AM
(5)
Re: Boron Oxide and Boric Acid - frank Posted on 08/29/00 at 7:24 AM
(4)
Re: Boron Oxide and Boric Acid - Peter Posted on 10/16/01 at 10:54 PM
(1)
Re: Boron Oxide and Boric Acid - Jay Posted on 03/01/02 at 12:47 PM
(0)
Re: Boron Oxide and Boric Acid - frank Posted on 11/18/00 at 12:22 PM
(0)
Re: Boron Oxide and Boric Acid - suraya Posted on 11/16/00 at 8:41 PM
(1)
work function - Uwe Krause Posted on 08/16/00 at 1:14 AM
(5)
Re: work function - Tal Posted on 03/04/02 at 8:02 AM
(0)
Re: work function - reddy Posted on 03/12/01 at 4:14 AM
(3)
Re: work function - Steve Fice Posted on 03/05/02 at 11:17 PM
(0)
Re: work function - choi bie Posted on 02/26/02 at 9:36 AM
(1)
SnO2 - Unmesh Khadilkar Posted on 06/01/02 at 8:12 PM
(0)
Brush Electroless Plating? - Argonide Nanomaterials Posted on 08/06/00 at 9:34 PM
(2)
Re: Brush Electroless Plating? - LAWRENCE KENNEDY of STARLINE Posted on 03/22/02 at 7:03 PM
(0)
Re: Brush Electroless Plating? - Steve Brooks Posted on 01/18/01 at 11:13 PM
(0)
automated ultrasonic cleaning system - david moore Posted on 08/05/00 at 10:58 AM
(0)
Black spots on Tungsten Carbide (6% Nickel) - Mark Graham Posted on 07/28/00 at 9:20 PM
(0)
Silicon Carbide - Mark Graham Posted on 07/28/00 at 9:14 PM
(10)
Re: Silicon Carbide - Tong Liu Posted on 11/26/00 at 8:57 PM
(5)
Re: Silicon Carbide - EQBAL CERAMIC CO. Posted on 11/11/01 at 12:39 AM
(2)
Re: Silicon Carbide - Steve Dongziyi Posted on 03/05/02 at 6:42 AM
(0)
Re: Silicon Carbide - Mr zhao jinliang Posted on 12/09/01 at 7:29 PM
(0)
wanting more information. - SHASHANK DHANDHANIA Posted on 05/24/01 at 7:01 AM
(0)
Re: Silicon Carbide - amgad ( Egyption company ) in Egypt Posted on 05/19/01 at 10:34 AM
(0)
Re: Silicon Carbide - wcteng Posted on 07/29/00 at 1:37 PM
(3)
Re: Silicon Carbide - bibhu prasad swain Posted on 07/29/01 at 6:22 AM
(2)
Re: Silicon Carbide - bibhup Posted on 01/31/02 at 8:13 AM
(0)
Re: Silicon Carbide - zhao jinliang(Mr.) Posted on 12/09/01 at 7:36 PM
(0)
PVD sputtering sources - Antonio DEsposito Posted on 07/26/00 at 8:37 AM
(6)
Re: PVD sputtering sources - Ted Van Vorous Posted on 10/02/01 at 4:19 PM
(0)
Re: PVD sputtering sources - Ben Jensen Posted on 04/11/01 at 6:44 AM
(1)
Re: PVD sputtering sources - Dr.Ramesh Chandra Posted on 07/22/01 at 2:35 AM
(0)
Re: PVD sputtering sources - ali mousavi Posted on 04/09/01 at 10:44 PM
(0)
Re: PVD sputtering sources - H. S. Han Posted on 02/21/01 at 9:43 PM
(0)
Re: PVD sputtering sources - Bob Sims Posted on 01/18/01 at 10:39 AM
(0)
Job Opportunity - Process Development Engineer - Clayton M. Gilman - Gilman Associates Posted on 07/10/00 at 8:53 AM
(3)
Re: Job Opportunity - Process Development Engineer - Reuben Dahan Posted on 03/25/02 at 2:05 PM
(0)
Re: Job Opportunity - Process Development Engineer - Peg Magarian Posted on 01/15/02 at 2:49 PM
(0)
Thin filmprocess development engineer - S.srinivasulu, M.Sc.,M.PHil., (Thin Films) Posted on 04/16/01 at 5:06 AM
(0)
making a difussion pump - Robert DuHamel Posted on 06/30/00 at 11:24 AM
(5)
Re: making a diffusion pump - Mark Posted on 10/11/01 at 4:19 PM
(0)
Re: making a difussion pump - julius noval Posted on 10/13/00 at 6:13 AM
(2)
RE; wire coating - steve berard Posted on 02/28/01 at 10:58 AM
(1)
Re: RE; wire coating - Pat McMahon Posted on 12/11/01 at 10:41 PM
(0)
Re: making a difussion pump - wcteng Posted on 07/04/00 at 12:42 AM
(0)
Lyphylization - Jerry Rausch Posted on 06/23/00 at 10:26 PM
(1)
Re: Lyphylization - Howard Tring Posted on 04/10/01 at 7:45 AM
(0)
plasma polymerization - Antonio M. D'Esposito Posted on 06/15/00 at 11:23 AM
(3)
Re: plasma polymerization - T. Saravana Prakash Posted on 01/06/01 at 3:56 AM
(2)
Re: plasma polymerization - maya g Posted on 04/23/02 at 6:16 AM
(0)
Re: plasma polymerization - Fadime Fulya PÜRTAÞ Posted on 11/13/01 at 8:01 AM
(0)
interferometer - Mike Pagano Posted on 06/13/00 at 11:04 AM
(1)
Re: interferometer - Hemang Posted on 01/16/01 at 8:21 AM
(0)
Postdoctoral vacant ( Taipei, Taiwan) - Mu-Rong Yang Posted on 06/10/00 at 7:46 PM
(1)
Re: Postdoctoral vacant ( Taipei, Taiwan) - mohammad hadi moayed Posted on 08/26/01 at 3:28 AM
(0)
mini vacuum pump (<7mm!) - mike channell Posted on 05/26/00 at 12:36 AM
(1)
Re: mini vacuum pump (<7mm!) - Bruce Sylvester Posted on 03/15/01 at 3:33 PM
(0)
DC Diode Sputtering Parameters - Jim Tisdall Posted on 05/18/00 at 4:26 PM
(3)
Re: DC Diode Sputtering Parameters - Bill Pierce Posted on 03/13/02 at 11:01 AM
(0)
Re: DC Diode Sputtering Parameters - wcteng Posted on 05/21/00 at 3:09 AM
(1)
Re: DC Diode Sputtering Parameters - asif Posted on 06/03/02 at 3:00 AM
(0)
Engineers and Managers needed, interested???? - Lily Robles Posted on 05/18/00 at 1:28 PM
(0)
GM plant in Thailand - Kurt Schoedel Posted on 05/09/00 at 7:41 AM
(16)
Re: GM plant in Thailand - Surasak Surinphong Posted on 07/25/01 at 2:24 AM
(0)
Re: GM plant in Thailand - Muhammad bin Abdullah Posted on 07/03/01 at 3:13 AM
(0)
Re: GM plant in Thailand - Sumit Jain Posted on 08/25/00 at 7:03 AM
(6)
Re: GM plant in Thailand - Kurt Schoedel Posted on 08/28/00 at 7:05 AM
(5)
Re: GM plant in Thailand - asad bin masud Posted on 04/20/01 at 3:08 AM
(0)
Re: GM plant in Thailand - Kittikorn Mongkolsawat Posted on 10/12/00 at 1:15 AM
(1)
Re: GM plant in Thailand - H.G. Fuss Posted on 02/24/01 at 11:06 AM
(0)
Re: GM plant in Thailand - Sumit Jain Posted on 08/28/00 at 8:46 AM
(1)
Re: GM plant in Thailand - Kurt Schoedel Posted on 09/06/00 at 6:09 AM
(0)
Re: GM plant in Thailand - Ron Cobley Posted on 08/10/00 at 7:03 PM
(5)
Re: GM plant in Thailand - Kurt Schoedel Posted on 08/28/00 at 6:57 AM
(4)
Re: GM plant in Thailand - Cheong SY Posted on 04/15/01 at 2:06 AM
(1)
Re: GM plant in Thailand - troy Posted on 06/17/01 at 7:39 PM
(0)
Re: GM plant in Thailand - Suchat Posted on 01/12/01 at 11:24 AM
(0)
Re: GM plant in Thailand - Ron Cobley Posted on 08/28/00 at 10:40 AM
(0)
search for general information - Dirk Apitz Posted on 05/03/00 at 9:02 AM
(2)
Re: search for general information - mike plaisted Posted on 05/04/00 at 5:36 AM
(1)
Re: search for general information - H.G. Fuss Posted on 08/19/00 at 6:11 AM
(0)
Used E-beam coater - Jeff MacCubbin Posted on 03/23/00 at 2:32 PM
(2)
Re: Used E-beam coater - ivan b. culaba Posted on 07/23/01 at 7:03 AM
(0)
Re: Used E-beam coater - wcteng Posted on 03/24/00 at 5:28 AM
(0)
Vacuum Coating as a Hobby? - Mike Gray Posted on 03/16/00 at 9:39 AM
(30)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 03/17/00 at 7:46 AM
(28)
Re: Vacuum Coating as a Hobby? - Syed Anwar Ali Posted on 07/22/00 at 11:07 AM
(4)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 07/29/00 at 2:18 PM
(3)
Re: Vacuum Coating as a Hobby? - Syed Anwar Ali Posted on 08/06/00 at 12:12 PM
(1)
Re: Vacuum Coating as a Hobby? - Xavier Kuriyan Posted on 10/30/00 at 1:47 PM
(0)
Re: Vacuum Coating as a Hobby? - Syed Anwar Ali Posted on 07/31/00 at 9:58 AM
(0)
Re: Vacuum Coating as a Hobby? - Mike Gray Posted on 03/17/00 at 7:54 AM
(21)
Re: Vacuum Coating as a Hobby? - Zaker Uddin Ahmed Arif Posted on 09/27/00 at 3:39 PM
(2)
I need vacuum coating equipment. - Zaker Uddin Ahmed Arif. Posted on 09/27/00 at 3:49 PM
(1)
Re: I need vacuum coating equipment. - Tony Reem Posted on 01/04/01 at 6:00 PM
(0)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 03/20/00 at 8:39 AM
(10)
Re: Vacuum Coating as a Hobby? - Mike Gray Posted on 03/20/00 at 9:22 AM
(9)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 03/20/00 at 10:13 PM
(8)
Re: Vacuum Coating as a Hobby? - Mike Gray Posted on 03/20/00 at 10:39 PM
(7)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 03/24/00 at 5:31 AM
(6)
Re: Vacuum Coating as a Hobby? - Mike Gray Posted on 03/24/00 at 4:46 PM
(5)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 03/25/00 at 6:12 AM
(4)
Re: Vacuum Coating as a Hobby? - Mike Gray Posted on 03/25/00 at 9:03 AM
(3)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 03/26/00 at 4:49 AM
(2)
Re: Vacuum Coating as a Hobby? - stan Posted on 05/10/00 at 1:19 AM
(1)
Re: Vacuum Coating as a Hobby? - Joe Rongen Posted on 05/11/00 at 7:02 PM
(0)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 03/20/00 at 8:08 AM
(6)
Re: Vacuum Coating as a Hobby? - ALAKSAH Posted on 05/20/00 at 11:18 AM
(5)
Re: Vacuum Coating as a Hobby? - Nick Jaber Posted on 01/02/01 at 2:50 AM
(3)
Re: Vacuum Coating as a Hobby? - ALKASAH Posted on 01/02/01 at 6:24 PM
(2)
Re: Vacuum Coating as a Hobby? - wcteng Posted on 05/21/00 at 2:34 AM
(0)
Silicon sputtering targets - Fred Perry Posted on 03/11/00 at 3:27 PM
(4)
Re: Silicon sputtering targets - cruz Posted on 06/07/00 at 12:04 AM
(3)
Re: Silicon sputtering targets - Christopher Johnson Posted on 03/21/02 at 5:58 PM
(0)
Re: Silicon sputtering targets - MIKE P Posted on 08/24/00 at 5:36 AM
(0)
Re: Silicon sputtering targets - Fred Perry Posted on 06/07/00 at 2:46 PM
(0)
Evaporation grade pure Germanium - Fred Perry Posted on 03/11/00 at 3:24 PM
(0)
Coating service for metals, ceramics, polymers, composites - Andy Schuyler Posted on 03/10/00 at 11:45 AM
(1)
Re: Coating service for medical needles already coated for a first time with polyesters to be coated another time with electroconductive polymers - Wilhelm Waskönig Posted on 01/30/02 at 1:38 PM
(0)
Hollow cathode discharge(HCD) technology - Martin Posted on 03/05/00 at 3:14 AM
(5)
Re: Hollow cathode discharge(HCD) technology - Kurt Schoedel Posted on 03/29/00 at 2:06 AM
(4)
Re: Hollow cathode discharge(HCD) technology - Alex Yuan Posted on 03/31/00 at 7:14 AM
(3)
Re: Hollow cathode discharge(HCD) technology - kurt Schoedel Posted on 04/03/00 at 2:58 AM
(1)
Re: Hollow cathode discharge(HCD) technology - Surasak Surinphong Posted on 07/25/01 at 1:59 AM
(0)
PVD technology - Martin Posted on 03/05/00 at 3:13 AM
(10)
Re: PVD technology - kermani Posted on 11/12/01 at 3:42 AM
(1)
Re: PVD technology - soleimani Posted on 04/28/02 at 6:58 AM
(0)
Re: PVD technology - Enoch Braude Posted on 07/04/01 at 11:32 PM
(0)
Re: PVD technology - Kim Talledo Posted on 11/06/00 at 12:44 PM
(0)
Re: PVD technology - H.G. Fuß Posted on 08/19/00 at 5:49 AM
(3)
Re: PVD technology - Mark Jarratt Posted on 01/24/02 at 6:23 PM
(2)
Re: PVD technology - International Marketing Corporation Posted on 04/27/02 at 4:15 AM
(1)
Re: PVD technology - BOb Posted on 05/16/02 at 5:16 PM
(0)
Re: PVD technology - wcteng Posted on 03/06/00 at 12:07 PM
(0)
Welcome! Friends. - Alex Yuan Posted on 03/04/00 at 7:28 AM
(2)
Re: Welcome! Friends. - Sput Posted on 04/20/00 at 3:25 PM
(1)
Re: Welcome! Friends. - wcteng Posted on 05/21/00 at 2:51 AM
(0)
[ Administrative Control Panel ]
