Remember: This is a venue to promote people not companies, so if you are planning a submission please tell us what you can do, not what your company can do.

Name: State Tool Gear Co., Inc.
Organization: State Tool Gear Co., Inc.
Experience: Located in Newark, NJ, for 37 years, we have specialized in gear cutting and grinding.
Phone: 973-462-6181	Fax:
Homepage: http://www.statetoolgear.com

Name: Rebecca Vaughan
Organization: Neoterik Health Technologies
Experience: Industrial respirators, PAPR's, fume extractors, blowers, environmental assessment, training, fit-testing, hazmat, first responder
Phone: 301-845-2777	Fax: 301-845-2213
Homepage: http://www.neoterik.com

Name: Don Norris
Organization: http://www.frii.com/~dnorris
Experience: Silversmithing and Silvercasting experience for over 30 years. I have taught Silversmithing and Silvercasting for more than 25 years, and continue to teach classes in my two classrooms, one in Loveland and one in Boulder, Colorado. I am also teaching Online Classes in Silversmithing and have several email lists for discussing it. You can find more information about the lists and the classes at http://www.frii.com/~dnorris.
Phone: 1-970-586-8750	Fax: 1-970-577-1838
Homepage: http://www.frii.com/~dnorris

Name: Azaad Hosein
Organization: South Beach Fire Service
Experience: Fire Retardants,Glass Coatings,lubrication Developers of Slick 50
Phone: 954-435-4485	Fax: 954-441-3330
Homepage: http://www.sobefire.com

Name: Joe Carrigan
Organization: Trinity Enterprises Inc.
Experience: 30 years of job shop turning experience from Brown & Sharpe Automatic Screw Machines to CNC Turning centers. Available for consulting and able to help network from work available to finding the right source. Example of creativity to help increase productivity in smaller shop is an affordable and simple to use Excel97 based spreadsheet for estimating and quoting that I have recently developed. Material calculations for weight and footage, Simple solution for right triangles, scrap calculator, over 500 formulas at your fingertips. Even if you have never used Excel, if you have it, you will be productive immediately. Take a look and download free demo at site below: Note the "D" in Default is capitalized.
Phone: 201-847-0248	Fax: 201-847-0253
Homepage: http://hometown.aol.com/ezestimate/Default.htm

Name: Don Bee
Organization: Bee Metal Products Ltd.
Experience: Manufacturers of belt sanding/grinding equipment for the metaland manufacturing industry; foundrys; glass shops; knife makers. Vast range of sizes and options available. We've been in the market for over thirty years. Contact us with your requirements... we will get back with our recommendations.
Phone: 519-536-9520	Fax: 519-536-9521
Homepage: http://

Name: Stephan Schmidt
Organization: Arthur D. Little
Experience: 5+ years in NG and LP combustion systems, burner and heat exchanger design, product development, program management, controls, LabVIEW, technical feasibility assessments, market studies, client relations and presentations, proposal formulation, fluent in German and English
Phone: 617-498-5459	Fax: 617-498-7206
Homepage: http://

Name: Matthew J Vona
Organization: ChemicalAnalysis.com
Experience: experience in analytical chemistry, instruments, companies, labs, and where to find resources in your area.
Phone: 209 465-0750	Fax: 413 541-8161
Homepage: http://www.ChemicalAnalysis.com

Name: Mark Svitkin
Organization: TECHNOMACH Co., Ltd.
Experience: We are the experts in the geometry of the heavy shafts, rolls and other bodies of rotation. Form testing and elimination of the from errors during machining. We have the unique knowhow for perfect roundness.
Phone: +7 812 9625180	Fax: +7 812 2466648
Homepage: http://www.roundness.net

Name: S. SIMHA
Organization: Management Professionals Group (P) Ltd.
Experience: 25 years experience in Erection & Commissioning of Paper Machine along with Works Shop Experience. Worked as a Manager Erection in Jessop & Co., Worked as a Deputy General Manager in Rama News Print, Surat, India. Present Director Management Professional Group (P) Ltd. Calcutta India.
Phone: 5701598, 5700526	Fax: 5700526
Homepage: http://

Name: Stephen James Booth
Organization: Teknokraft Asia
Experience: 5 Years running my own Thermal Spray and Wear Protection workshop Maintenanance and repair welding for the Paper industry, Mining, and Oil and GAS 12 years in Industrial sales for Welding consumables, as Manager for Southeast Asia
Phone: 62-21-780-5402	Fax: 62-21-780-8016
Homepage: http://

Name: Kevin Galvin
Organization: lund international
Experience: heat treatment alloy materials, hard facing of wear materials on softer mnetals, tungsten carbide thermal spraying, autocad,pro engineering variuos other engineering functions.
Phone: 00353 902 75311	Fax: 00353 902 74935
Homepage: http://

Name: Mark Hillier
Organization: Kelmar Tool
Experience: Over twelve years in the manufacturing of diamond(pcd) & cbn tipped tooling. Manufacturer of solid carbide step drills, reamers, endmills & form tools.
Phone: 1-877-519-7006 toll free 440-954-8665	Fax: 440-954-9882
Homepage: http://www.kelmartool.net

Name: steve selvia
Organization:
Experience: Twenty Two years manufacturing experience with CNC machine tools. Programming, operating, tooling, process development, training, turn key projects. Also interfacing and maintenance. Working as Applications Engineer for machine tool dealer last ten years. Looking for employment in the industry.
Phone: 770-426-7773	Fax:
Homepage: http://

Name: Joseph Hauber
Organization: Maintenance Management TIPS
Experience: I have collected Free Maintenance Magazines, unique tool info, and a list of CMMS (Computer Maintenance Management Software) programs. Many offer free demos. I let Maintenance Professionals search the database for free.They ca n find good software matching their application(s). Use Home Page location,below.
Phone: 858-755-3500	Fax: 858-755-5646
Homepage: http://www.get-tips.com

Name: John Robbins
Organization: Automation Consultants
Experience: I have twelve years of experience diagnosing and repairing Fanuc controlled cnc equipment with an emphasis on accuracy and electrical problems. I specialize on the integration of this equipment to accessories such as robots, additional axis and parts loaders. I have developed and taught a training program for troubleshooting cnc machines, using Fanuc controls, that uses a hands on approach.
Phone: 812 923 3718	Fax: 812 923 5396
Homepage: http://www.automacon.com

Name: Alan Cechovsky
Organization: Leads Technical Group, Inc.
Experience: Design, solid model and project manager of material handling container and inplant sub assembly layout.
Phone: 519 383 1062	Fax: 519 383 383 0488
Homepage: http://leadstechgrp@netscape.net

Name: Allan Hudson
Organization: A. Hudson
Experience: Machineshop experience 30 years.Centre lathes Mills etc,low tech stuff-Posted this simply because I enjoy machining & may be able to offer some help to the hobbyist who may be struggling with the basics. I currently am self employed,machining in the "shed" in the backyard, and loving it. Email if I can be of any help with the basics.
Phone: 07 47783191	Fax: 07 47783191
Homepage: http://

Name: Subhasis Ganguly
Organization: Indian Railways
Experience: I have about ten years of experience in FEM analysis using Ansys, NISA, NASTRAN, Pro-Mechanica. I have worked with stress analysis,fracture mechanics,heat transfer, dynamics and Aeroeleasticity. I have also lead teams in various capacities. I have excellent knowledge of Indian market system. I am just the person you are looking for to open your branch in India.
Phone:	Fax:
Homepage: http://

Name: Mark Daniell
Organization: Wysong & Miles Co.
Experience: Engineering Technician with 5 years industrial experience with CNC Press Brakes and Shears. Specializing in CNC control electronics and software development. Prior experience includes Two years PC software support, Two years Financial software development and Three years Tech College lecturer in Electrical and Electronics.
Phone:	Fax:
Homepage: http://

Name: Olga Lewis
Organization: none
Experience: Electrical engineer with 15 years of experience in building and facilities design (Interior & Exterior Lighting, Power Distribution, Fire Alarm,...). I am foreign with work permit, newly married an American, trying to establishe my new life and carrier in the US.
Phone: (401) 823-1634	Fax:
Homepage: http://

Name: Wayne Pozarycki
Organization: Filtaquip (Pty) Ltd
Experience: We are a South African based organisation with outstanding electrowinning cathode and anode frame, and membrane material, technology for Nickel electrowinning. We design, manufacture and supply frames to client specification, and have produced frames for use in Australia, Brazil, South Africa and Zimbabwe.
Phone: +27 11 803 9553	Fax: +27 11 803 7380
Homepage: http://

Name: Steve Wyrick
Organization: Daystar Industrial Products
Experience: Solids from liquids separation and filtration, Oil water separation, high performance lubricants and automatic, single point lubricators.
Phone: (513) 844-2553	Fax: (513) 844-2553
Homepage: http://

Name: Bernard GEY
Organization: KERATEC Advanced Materials SA
Experience: experience in manufacturing technical ceramic products.
Phone: +34 985 20 76 13	Fax: +34 985 20 56 85
Homepage: http://www.keratec.com

Name: Jack Hsu
Organization: Guide Well Enterprise Co., Ltd.
Experience: We specialize in Fuel tanks, Radiators, Exhaust system, stainless steel pipe for American, Japnese, European cars and trucks. With more than 20 years experience, we can assure of high quality and meet with your need.
Phone: 886-2-27083605	Fax: 886-2-27048221
Homepage: http://www.allproducts.com/traffic/gwent

Name: Christopher Wright
Organization: CWRE
Experience: 35+ year in design engineering for aerospace, undersea, nuclear, process equipment, pressure vessel and piping industries. Wide experience in assessing and remediation of mechanical and structural failure analysis and dynamic and thermal problems. Hands on experience with lifting equipment, hydraulic components, electronic devices, food processing equipment.
Phone: (612)933-6182	Fax: call voice
Homepage: http://www.skypoint.com/~chrisw

Name: Ken Edwards
Organization: LMNO Engineering, Research, and Software, Ltd.
Experience: experience in fluid flow and hydrology calculations: Pressure pipe flow (Darcy-Weisbach, Hazen Williams, Colebrook eqn for Moody diagram). Open Channel Flow - culverts and rectangular channels. Venturi, nozzle, orifice calculations for flow measurement. Discharge from a tank through an orifice. Rainfall - runoff calculations. Lots of unit conversions. Bernoulli/Energy equation.
Phone: (740) 592-1890	Fax:
Homepage: http://www.LMNOeng.com

Name: Paul Sevin
Organization: Ovation Engineering, Inc.
Experience: Extensive experience in the modification of Fanuc CNC ladder logic, especially with regard to connection of external devices for data transfer (i.e. post-process gaging for automatic tool wear offsets). Ability to modify existing M-functions or create new ones based on your particular requirements
Phone: 888-336-1590	Fax: 810-336-1589
Homepage: http://www.ovationeng.com

Name: Dan Gilroy
Organization: Dan Gilroy
Experience: Swaging. Over 20 years experience designing and building dies, tooling and complete rotary swaging systems for industry. Owned and managed one of America's leading swaging job shops dealing primarily with the tough to produce parts. Currently provide consulting services to industry on all aspects of rotary swaging. Have given educational seminars at international trade shows. Have had technical articles relating to manufacturability published in trade journals. Experienced in comapany turn-arounds.
Phone: 1-305-515-0105	Fax: 1-305-515-0106
Homepage: http://www.1paradise.com/dan/

Name: Brian Lightfoot
Organization: Consultant - based in Australia
Experience: 25 years experience in Pyrometallurgy. Smelting, tin, copper, lead, zinc, silver, gold, antimony, nickel, thermal waste treatment and others. Interested in developing technology from R&D to commercialisation - small company startups. Previously Technical Director of Ausmelt Limited who commercialised smelting technology - from R&D base clients have spent over US$500m on commercial applications of the technology. See brian.lightfoot.com for details.
Phone: +613 5968 3037	Fax: +613 5968 3037
Homepage: http://brian.lightfoot.com

Name: Patrick DUHAUT
Organization: BIOTEL
Experience: Background in medical, packaging, transport and space industries, our team helps manufacturing companies to manage their R&D project on polymers topics (surface, additives, grafting). We improve their own knowledge by indentifying technological opportunities, contributing ideas and managing project through a specific "project team". Like that, our scientist can work on the technical aspect of the project with a good efficiency.
Phone: 33-1-34-15-78-88	Fax: 33-1-34-15-77-99
Homepage: http://www.biotel.fr

Name: Michel Baudin
Organization: MMTI - Mfg. Mgt.& Technology Institute
Experience: We help manufacturing companies implement lean production, which is the most effective, highest performance approach to manufacturing today. Specifically, we help our clients improve their delivery, cost, and quality performance, by identifying opportunities, contributing ideas, providing training, and guiding employees through implementation. As improvements in material flows, operator job designs, and processes materialize, operators find their workplace safer and their jobs both richer and more secure. The company's stronger competitive position means that there is more work to do, but it has more variety, it is conducted at a steady but sustainable pace, and operators participate in its design.
Phone: 650 856 8928	Fax: 650 858 1873
Homepage: http://www.mmt-inst.com

Name: Greg Mercurio
Organization: Shop Floor Automations, Inc.
Experience: Specializing in CNC networking of machines tools and serial equipment on the shop floor. I can help you with saving time and money by automating your shop with DNC software, eliminating paper tape, memory expansions, bar coding equipment, retrofits, PC enclosures, RS232/RS422 cabling and more. If you have technical questions about CNC communication or shop management, I can help with over 200 different resources at my figure tips.
Phone: 619-640-5825	Fax: 619-641-7951
Homepage: http://www.shopfloorautomations.com

Name: Bob
Organization: Microvolt Company
Experience: FCC-15, -22, -24, -68, -90 and -101 compliance services MIL-STD 461, RTCA-DO-160 compliance services CISPR-22 and CE Mark compliance services Open Area Test Site calibration services We can provide excellent and efficient EMC consulting services to meet MIL-STD-461, FCC-15, FCC-68/IC,CISPR-22, UL-1950 and CSA specs. Requirements. Designing EMC & Safety requirements at initial stages of design of a product will help you to bring products into the market place fast and at less cost to you. EMC and Safety consulting services are offered to you by EMC Industry Experts. Please also check our web site at: http://www.microvolt.com
Phone:	Fax:
Homepage: http://www.microvolt.com/

Name: John E. Steer
Organization: Steer Engineering
Experience: My expertise in in Product Design & development. I have 19 patents. Castings, plastic, hydraulic, vacuum, air components & assemblies. Developing from concept to production using FEA where appropriate. Sheet Metal Forming simulation software developed with the U.S.A.F. for hydroforming, stretchforming, tube hydroforming.
Phone: 1-419-394-0527	Fax: 1-419-394-0527
Homepage: http://steer-eng.hypermart.net

Name: R. R. Shastry
Organization: Super Shock Absorbers Limited
Experience: Twenty years in the Indian Auto, Engineering industry in machine tool design, vendor developement,projects and production.
Phone: 91-44-4901644	Fax: 91-44-4919270
Homepage: http://

Name: Carl Howarth
Organization: Howarth Development Associates
Experience: Product design, development, and analysis of plastic and composite components. Cost savings through replacement of metal. Structural validation of candidate designs using FEA.
Phone: 248.642.3900	Fax: 248.642.2247
Homepage: http://howarthc.home.mindspring.com/HDA.html

Name: Tracy Black
Organization: Independent
Experience: i've got major exp. in wiring manual mills/lathes/plotters/digitizers up to personal computers. programming and hardware electronic, mechanical, chemical, business and computers are just a few of my specialties. im 36 white male married with children currently living in upstate south carolina would make the model employee for that special project or projects e-mail me or 864/947-7890 for further info thanx for your time
Phone: 864/947-7890	Fax:
Homepage: http://

Name: Bob Miller
Organization: Clad Technologies Inc.
Experience: 30 Years experience in the welding buisness. I am a metallurgicall/welding engineer. 16 Years with Teledyne/Hobart Mckay (R&D), 8 Years at Tricon Metals (Cladded Products Manager), 3 Years at Welding Alloys (Sales) and the remainder as Consultant for Hardfacing and Wear Technology. I work with idustry to solve wear problems. I also work with OEM (welding related) businesses with product development, training, marketing.
Phone: 205-978-5186	Fax: 205-978-9806
Homepage: http://www.cladtechnologies.com

Name: Brian Dengel
Organization: Quality Transmission Components
Experience: General knowledge of gear design, usage and terminology. Expertise in metric gear design.
Phone: 516-437-6700 ext 546	Fax: 516-358-9478
Homepage: http://www.qtcgears.com

Name: Stanley Parnas
Organization: EnergyAssociates
Experience: Background in packaging, industrial, medical, electro-optical and laser applications. I can develop market plans, market analysis, comparative analyses and budgets for national and international clients. I have experience in reorganizing marketing operations. of direct sales people, reps and distributors. Worked with national accounts as Nabisco, Quaker Oats, Willett plc, Experience in advertising and promotion, contract gotiations, and acquisitions.
Phone: 702-531-2674	Fax: 702-453-0697
Homepage: http://members.aol.com/marparn/index.html

Name: Mark Reynaert
Organization: Mark Mold
Experience: Tools, Dies, Molds, Fixtures, Gages. Injection Molding. Thermoforming, Blow Molding. Progressive and Line Dies. Prototypes and Production tooling. Product Developement.
Phone: (517) 687-7651	Fax: (517) 687-9786
Homepage: http://members.aol.com/MrMold