In Reply to: New Jobs Posted posted by Al Carpenter on 12/17/02 at 8:40 AM:
LUFKIN, TEXAS 75904
I've served as the "right arm" for construction supervisors and project managers for the last several years. Although I don't have the Bachelors degree you request, I think you'll find that my current job qualifications and skills provide an adequate substitute. I'm proficient in many of the crafts and skills that are needed in the construction industry and am well aware of the tremendous responsibilities that fall upon personnel that are in management positions. I have acquired the computer skills that are used in the construction industry and have a good working knowledge of some of the specialty programs. I work well from schematics, assembly drawings and blueprints. I have worked on many projects that required coordination of crafts for job specific functions and have excellent personnel management skills.
When we have the opportunity to meet, I'll elaborate on my work experience--which seems to complement your needs--and supply you with strong references. I can be reached during the day at 936-875-4498. A full resume including all applicable certifications can be faxed to you if you feel that I meet your requirements.
I'm looking forward to discussing the position with you.
Lufkin, Texas 75904
Home phone 936-875-4498
Have a very high mechanical aptitude and skill level. Work off prints, plans and assembly drawings well. Have experience in repair of pump motors, reciprocating compressors, ventilation and air moving equipment. Have worked motorized conveyer systems and product transfer equipment of all kinds. I have done repairs to and installed vacuum-packaging equipment and set up and installed labeling and sorting lines. I have a good working knowledge of electronic controls and control devices analog and digital readers and sensors. I am HVAC/R qualified and have EPA certification. I am also certified as an ammonia operator with all the HAZMAT training and certifications needed to work in that field. I am familiar with many of the older types of reciprocating and screw compressors: MYCOM, RECO, FRICK and VILTER. I have done repair on air compressor packages used to power pneumatic controls to operate different types of line equipment and also have done Boiler and hot water heat exchanger work. I have a heavy lift equipment operatorís certification. I am not a licensed electrician but have worked as experienced help on most primary power to 660 volts and control termination on PLC and logic control systems. I have extensive training in electrical control diagnostics. I have done some structure and fabrication welding both in iron and in stainless steel. And have on occasion done some aluminum welding. I have an OSHA card and have received training as a Safety Coordinatorís assistant.
1964-1968 Longview High School Graduated
Have attended Trade Schools and Seminars, as they became available and pertained to the job at hand.
Joe Sanziwich Pilgrims Pride Lufkin, Tx 936-639-1174
Lance Honeycutt 14 Tanglewood Lufkin, Tx 936-634-6074
Dan Burgess 2210 Post oak Rd. Lufkin, Tx 936-875-2166
Elton Smith Huntington Rd Lufkin, Tx 936-465-3854
Kenneth Strickland Huntington Lufkin, Tx 936-876-5387
Elray Woods 118 Ridgewood Lufkin, Tx 936-639-2813
2001-2002 Service and Startup Technician, Republic Refrigeration Inc.
Primary responsibilities were to see that the construction job was complete and that it was ready to start-up. After verification it was my responsibility to trouble shoot any problems that might arise and coordinate needed crafts to correct that problem. After start-up we proved the system by operating for 14 days with no problems to signoff all punch list corrections.
Start-up Wal-Mart Refrigerated Distribution Center in MacKlinty, Florida checked new installation and start-up Ammonia System.
Start-up Wal-Mart Distribution Center in Clarksville, Ark. Removed 4 Ammonia coils and install and start up 4 new ammonia coils and new condenser.
Dillon's Refrigerated Warehouse Hutchinson, Kansas Install new control and Logic Panels interlocked to existing control circuits.
H.E.Butts Distribution Center Houston, Texas. Startup and service to new refrigerated warehouse section. Worked with factory mechanics from F.E.S. to interlock controls and reroute circuits as needed to complete control system.
Start-up renovation at Coors Brewery Golden Colorado.
Supervisor David James Phone: 1-800-779-0399
2000-2001 Multi-Craft Technician, Technip USA
Supervisor Anthony Buckner Phone: 1-800-564-4000
Primary responsibilities were to work with the different crafts as a technician and foreman over several unspecialized mechanics that as the job progressed moved into various craft specialties. In this manner we found that the labor force did not need to be as large and many of the mechanics were able to implement abilities that made the job run smoothly and at the same time endeavored to help all the crafts when extra manpower was needed. At the end of the job I was assigned to inspect and put together a final punch list and coordinate with the different crafts to complete all items and sign off to customer rep. This was a natural gas booster station in Greenville, Mississippi.
1994-2000 Sr. Maintenance and Refrigeration Foreman, Pilgrims Pride Corp.
Job requirements were to maintain and repair all equipment and electrical controls in the production plant also to assure the proper operation and maintenance of the ammonia refrigeration system that was needed to store product until it was shipped. Undertook several renovations on this plant where complete product lines were removed and new equipment was installed. All wiring and structure was fabricated at jobsite and maintenance personnel terminated most wiring. I was put in charge of the equipment installation crew, which worked to demolition the existing equipment and floors structures and layout by prints and drawings the new floor plan and equipment locations. In the same manner as above I helped to install new refrigeration equipment that was needed to handle the additional capacity provided by the production changes. This included forming and finishing housekeeping pads, installing pumps, vessels and compressors and all associated piping and electronic or pneumatic controls. Also did all repair work to existing A/C and freon refrigeration systems for administration and cafeteria buildings.
Supervisor Joe Sanziwich ph. 936-639-1174
1988-1994 Subcontractor mechanical and electrical work.
Hired out to different job crews in different locations. Sub contracted my labor to several of the local electrical and refrigeration companies that needed an extra hand or some specialized control or mechanical help. Started a small company of my own and started the renovation to the Pilgrims Pride plant and was offered a position in the refrigeration dept., which I accepted.
Work history Mike Feagin
1966-1968 Longview High School and worked at the Bryant Beverage Company
1968-1972 United States Navy (Vietnam Era Vet)
1972-1974 Project Transition Schools (VA Administration) A/C and Refrigeration, Basic Electrical, Pneumatics, welding, oilfield rigging.
1974-1978 Knappís Refrigeration Service and Installation. Jobs list: Eastman Kodak, Texas Eastman, Dow Chemical, United Gas and Chemical, Lone Star Steel Administration Bldg. Attended classes at Heat Research Corp. Industrial instrumentation and energy management systems. Heat Transfer and Boiler operation.
1978-1981 Gregg Mechanical Contractors Controls and General installation of Industrial Refrigeration and Ventilation Equipment. Job Lead Technician. Jobs List: Continental Can Company, Schlitz Brewery, Swenderger Development Longview Mall, Crestview Mall, and Alpine Mall.
1981-1984 Temp Tech Refrigeration Controls Specialist and Installation Foreman for Industrial Refrigeration Systems (freon and ammonia). Attended job related seminars and technical workshops in automated controls and software, basic computer programs. Jobs List: Albertsonís, Big Chief Consolidated Foods, Muntz Meatmarket and Grocery, Alligator Ice Production. Acted as General Foreman on last 3 jobs.
1984-1988 Boles Grocery Service and Repair Renovation of existing stores in 23 locations in South Texas. Installed Novar and Honeywell Energy Management Systems. Installed or renovated R12, R22, R502 Freezers, Coolers, Ice machines, Rooftop Package A/C. Worked as Project Manager for last two years.
1988-1994 Started my own company and contracted my labor to several Electrical and Refrigeration companies who needed expertise in controls or project management. Contracted to help with renovation of ammonia system at Pilgrims Pride Corp. Was offered a position on refrigeration dept.
1994-2000 Pilgrims Pride Corp. Ammonia Operator and Sr. Service Tech Plant renovations (freon and ammonia). Hired as employee after plant was renovated. Installed Interlogic Control Panels and multi-function modules in all engine rooms. Program to be operated from single location and monitored from 15 different locations.
2000-2001 Technip USA Job Foreman, Equipment Operator and Controls Technician Gas Booster Substation in Greenville Mississippi (Industrial, Natural Gas Plant) Was ask to take this job by electrical contractor who needed some one who could be multi-craft and step into a management position if needed.
2001-2002 Republic Refrigeration Inc. Service and Start-up Commissioning Supervisor
Wal-Mart Distribution Center Mac Klenty, Florida,
Wal-Mart Distribution Center Clarksville, Ark,
Dillonís Grocery Hutchinson, Ks.
HEB Warehouses Houston, Texas,
Wal-Mart Distribution Center New Caney, Texas,
Wal-Mart Distribution Center Moberly, Mo
Coors Brewery Golden, Colorado
NOTE: Travel is not a problem. Will relocate if the package is right. I am looking for a company that needs experienced personnel. Give me a call.
Pay scale $41,600