In Reply to: Re: CAD/CAM & PDM Developers for PUNE & MUMBAI(Very Urgent) posted by Vijay R on 07/06/02 at 4:35 AM:
Room No: 101,
Hyderabad - 500037.
Objective : To excel in an organization in which I can put my best efforts for the benefit of organization and mine.
Qualification : Master of Engineering
Discipline : Mechanical CAD/CAM
Institute : Central Institute of Tool Design, Hyderabad.
M.E (CAD/CAM) : 84.5 %(2001- 2003)
B.Tech (Mech) : 76.9 %(1997 -2001)
I.P.E (MPC) : 81.4 %(1994 -1996)
S.S.C : 78.3 %(1993 -1994)
Software Exposure :
CAD/CAM Packages :
Operating Systems : MS DOS,
Office Tools : MS-OFFICE 2000.
CNC Training Under Gone:
4 Axis -Bridgeport VMC2216
Controller: GE FANUC 21i
5 Axis - Bridgeport VMC1000XP
Wire cut: CNC Wire cut (Electronica)
CMM: Carl Zeiss 3D CMM for digitization and Reverse Engineering.
Master of engineering:
Title : FEM Based Evaluation Of Member Stiffness For Bolt Fastened Joints
Reliable estimation of member stiffness plays an important role in safe design of bolted connections. Different methods of estimation of member stiffness are available in literatures, which are limited to finite variations of parametric values. In the present work, the member stiffness is representation that is function of proposed non-dimensional parameter. Wide range of bolt sizes, washer dimensions, plate thickness and material properties are considered for characteristic curve evaluation of member stiffness. Linear elastic finite element analysis is employed for the evaluation member deflection and stress distribution. This project work was carried out using the analysis software ANSYS 5.4.
Title : Frequency Response Of Vibrating Human body in Standing Posture
In this project work the frequency response of the human body is plotted for different base vibrating conditions. It is assumed that the human body is assumed as a spring-mass-damper system. The each and every part of the body is assumed as a spring with damper and joint as lumped mass. The project work was carried out by harmonic analysis in ANSYS 5.5.
Name of Organization : Andhra Cylinders
Designation : Quality Supervisor
Duration : 6 Months(May 2001-Oct2001)
As a Quality supervisor, my job is to make sure that all the units that come off the Production line meet the set quality standards. I also have to coordinate and motivate the quality inspectors at various stages of the production process. I should also keep a watch on the workers so that donít alter the deleterious welding parameters. Under pressure to meet the production target, as this may have effect on the quality of the products. I am also responsible to keep the production go on smoothly and act judiciously, should any problem arise. This has honed my leadership qualities and managerial abilities.
Name : Jayachandra.P
Fatherís Name : Nandagopal.P
Date Of Birth : 13 Dec 1977
Nationality : Indian
Marital Status : Single
Langauges Known : Telugu, English And Hindi
I hereby declare that all above furnished details are true.