| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Manufacturing Community > Jobs Forum > Message
Main Menu

[ List Subjects ][ Current Board ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: Re: ASIC Positions in Atlanta, GA

Date: 08/14/01 at 8:52 AM
Posted by: niranjan kumar.valleru
E-mail: niru_valleru@yahoo.com
Message Posted:

In Reply to: ASIC Positions in Atlanta, GA posted by Resourcis on 06/26/01 at 5:35 PM:

Resume of
Contact Address: #387/A,8th main,
Bangalore, Karnataka
Ph : 9845094013
Email: niru_valleru@yahoo.com

OBJECTIVE: A challenging position in VLSI development using existing and emerging technologies.

EDUCATION:Bachelor of Engineering Degree in Electronics & Communication Engineering , P.E.S.Institute of technology, Bangalore University, Karnataka.
percentage of marks :
10th class - 65%
Intermediate - 69%
BE - 58%

P.G.Diploma in VLSI Design From V3 Logic Pvt Ltd Bangalore. undergone training in Verilog,VHDL, ASIC Designing, Design using PLDs -FPGA and CPLDs, CMOS VLSI, Use of different EDA Tools etc. at V3logic,Bangalore from January 2001.


Presently working in Edurite technologies,Bangalore from December,2000 to the till date,as Software Engineer.

Worked in Amararaja Power Systems, Tirupathi from September,1999 to October 2000. During this period I was trained competently in the areas of Digital electronics, ISO Procedures and Microcontrollers.


 Designing using VHDL/Verilog.
 Behavioral & RTL coding.
 Synthesis and Simulation issues.
 Functional Verification and Testing.
 Timing Analysis
 Back-end design (Place & Route).

HDL Known : VHDL ,Verilog.
EDA Tools worked on :
Modelsim --- Simulator.
Xillinx --- FPGA Designer.
Leonardo spectrum --- Synthesizer.
Renoir --- FSM Coding.

Additional qualification:
Have a thorough knowledge of design and deployment of digital and microcontrollers and associated technologies.

Software Profile:
Languages : Fortran77, Turbo C,
GUI : Visual Basic 5.0 .
Operating Systems : Windows 95/98/NT/2000, DOS.


Project#1: Ethernet Transmitter.

Specification: Design of Ethernet Transmitter compatible with IEEE 802.3 standard. Transmitter is completely based on the CSMA/CD protocol, The data coming from LLC sublayer is stored inside a FIFO. And the entity has to only read it. The data is coming continuously at appropriate speed. In case of retry the upper layers will again send and data packet. The destination address and data field length are of 10MbPS and data is sent serially. If collision attempts exceed 16 then severity is reported. This is small description.

RTL Coding in - VHDL
Simulation in - Verilog
Team size - 4
My role in Project : RTL coding & Test bench in verilog and also involved in core designing .
Company : Edurite Technologies.

Project#2 : UART.

Specification: Universal asynchronous receiver/transmitter has internal FIFOs which are activated allowing 16 bytes to be stored in both receive & transmit modes.All this is to reduce the system overload,This performs serial to parllel conversion On data characters received from peripheral device or modem and parllel to serial conversion on data characters received from cpu.cpu can read complete status of UART at any time.The status information report includes condition of the transfer operations being performed by the UART as well as any error conditions.
The UART includes a programmable baud rate generator that is capable of dividing the timing reference clock input by a divisor and also it is fully programmable.

RTL Coding in - Verilog
Simulation in - Verilog
Team size - 3
My role in Project : RTL coding & Test bench in verilog and involved in core design.
Company:Edurite technoligies

Project#3: Floting Point Arithmatic.

Specification: Floating point arithmetic is a representation of real numbers and this project is worked on the IEEE-754 & standards. There are four basic operations i.e Addition,Subtraction,Multiplication,&Division are done based on IEEE-754 standards.features like Normalisation,special values,exceptions,Rounding modes & comparision are taken care in this project.

RTL Coding in - Verilog
Simulation in - Verilog
Team size - 3
My role in Project : RTL coding & Test bench for Addition,subtaction,division & Multiplication.
Company:Edurite technologies

Project#4: ARBS tester

Specification : ARBS tester is a system which can check the automobile battery, regulator, starter and alternator. The system can be interfaced with a personal computer for transferring the data into pc through serial port. All related data Can be easily printed out for future references. The system is micro-controller-based system, which was very successfully deployed.

Company : AmaraRaja Power Systems (pvt).
Team size : Three
My role in project : Involved in design & making the product for production.

Project #5 : CB Transmitter & receiver
Team : two
Description : CB transmitter & receiver is used for communicating between two points of distance which is less than 20Km.communication is done through amplitude modulation.
Place :Southern power grid ,Bangalore(academic project during B.E course)

Permanent address:
Niranjan Kumar Valleru,
S/o Mr.Jayarama Naidu.V,
Durganagar colony,
Phone: 08572-40331.
Pass port No: A7084290

(Niranjan kumar.V)

Follow Ups:

Post a Follow-up:


Message to Post:


1999-2001 Sunlit Technology Co., Ltd. All rights reserved.