[ List Topics ][ Current Board ][ Post Message ]
Subject: Re: FS Plastic Processing Equipment
[ View Followups ][ Post Followup ]
Date: 01/17/01 at 6:58 AM
Posted by: Sorin Balint
In Reply to: FS Plastic Processing Equipment posted by Syed Meerza on 12/13/00 at 12:27 PM:
ICEFS S.A. Savinesti ROMANIA
Dear Sir or Madam:
We are interest in the acquisition for our production department of a compounding line with a twin screw extruder for polyamides and polyolephines (with degassing possibilities), used the following typical applications:
-reinforcing with glass fiber and carbon fiber;
-compounding with mineral filler;
-production of pigment, flame retardants and fillers concentrates;
-production of different plastics alloys ( PP / EPDM, PE /.EPDM, PP / PA).
Technical description of the compounding line and of the extruder:
-throughputs 500-600 kg/h, about 1200-1600 lb./hr.
-twin screw arrangement: co-rotating, with transport, shear and mixing sections;
-barrel: modular arrangement ( for feeding, degassing, vertical dosing, lateral dosing);
-screw diameter -D ( estimated): 60 mm; ratio length (L) / diameter (D): 36-48.
We mention that the screws and the barrel must have units with a special treatment for reinforcement with glass fibres.
Material data: processing of thermoplastics supplied either as pellets or as powder, reinforcing agents, fillers and pigments supplied either as powder, beads and fibers.
Automatic feeders for polymers, additives and glass fibers dosage.
Lateral twin screw feeding for poor-flow and wall-adhering fillers or additives;
Strand granulation equipment ( die head for strands, cooling bath, strand pelletizer / water ring pelletizer ).
If you can offer such an equipment, please let us know about technical details and price to e-mail or to my personal e-mail or by fax to +40 33 281074 or +40 33 281680.
We are looking for used equipment.
With best regards,
ICEFS S.A. Savinesti,
Ing. Sorin Balint
Post a Follow-up: