| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Manufacturing Community > Technical Forum > Message
Main Menu
Find

[ List Subjects ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: Postdoctoral Position at Queen's University

Date: 07/26/00 at 8:53 AM
Posted by: Matthew Olmstead
E-mail: olmstead@me.queensu.ca
Message Posted:

Posted at: http://conn.me.queensu.ca/dept/sensor.htm

The Manufacturing Analysis Laboratory of Department of Mechanical
Engineering, Queen's University in Kingston Ontario Canada, invites
applications for a postdoctoral position in the area of Sensor Design
and Development.

The position will deal with the design and development of a sensor to
measure forces in a mechanical wood-pulp refiner. A prototype has been
designed, built and
tested in a lab-scale refiner. Further analysis and testing of this
sensor is to be conducted. Subsequently, a new sensor, for installation
and testing in a pilot-scale
refiner, is to be developed.

Persons applying for this position with experience in one or more of the
following areas will be an asset to the project:

Finite Element Modeling
Piezo-ceramic devices
Mechanical Design
Instrumentation
Experimental Vibration Analysis

Funding is set at $32,000 (Canadian $) per year, applications received
before September 1st 2000 will be given priority.

For more information please contact:

Dr. Peter Wild
Department of Mechanical Engineering,
Queen's University,
Kingston, Ontario,
Canada K7L 3N6
Fax: (613) 533-6489
wild@me.queensu.ca


Follow Ups:


Post a Follow-up:

Name:
E-Mail:
Subject:

Message to Post:

 

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.