| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Electrical and Electronic Community > Technical Forum > Message
Main Menu
Find

[ List Subjects ][ Current Board ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: Re: Power Ultrasonic Transducers for cleaning

Date: 12/31/00 at 1:21 PM
Posted by: Brian Snell
E-mail: bsnell@lara.on.ca
Message Posted:

In Reply to: Re: Power Ultrasonic Transducers for cleaning posted by Nick Jaber on 12/31/00 at 5:01 AM:

I note your query on Ultrasonic Cleaning for jewelry. I recall a complete Construction Article for such a cleaner in an issue of "Electronics Now" a few years ago. This also covered parts required in some detail together with suppliers names and addresses.

Unfortunately, I do not have a copy of the magazine any more but if you check with your local Public Library and consult the "Reader's Guide to Periodical Literature" there should be a reference to the original article which should give you the issue date. You will be able to locate a copy of the article direct from the Reprint Dept at Gernsback Publications, 500 B-County Road, Farmingdale, N.Y. USA. I believe that they may also have a Web address as well but you could try an Internet search using "Gernsback" as a key.

I hope that this is of some help.

Regards,

Brian Snell.


Follow Ups:


Post a Follow-up:

No Follow Ups for this message is needed here. Please use the following link to go back to the current board of this forum. You could create a new thread there if it is needed.

[ Go Back ]

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.