In Reply to: A synthesis question ( PCI based ASIC ) posted by Yang Li on 03/11/00 at 7:02 AM:
: A synthesis question
: I have a design which is to be targeted to ASIC.
: This design has synthesized with 66 Mhz PCI constraint. Timings are not met with a slack of approx -4 ns
: I gave worst case constraints from PCI side. and best case synthesis cell selection options(timingwise)
: As the code changes will take a lot time again to simulate, I have another quick option
: I am sure that this design will work on 33 Mhz clock.
: Now what method I am following is
: 1) Synthesis with 66 Mhz constraint with worst case PCI delays. Let the logic be generated with max efforts.
: 2) Generate timing reports for 66 Mhz , 33 Mhz . ( Ofcource 66 mhz will fail. )
: 3) Target it to ASIC. with a facility on board made for 33 Mhz, 66 Mhz. ( PCI66EN and Config space bit reset from board jumpers ).
: 4) Assume that PCI chipset will give me best timings ( If I put the card nearer to chipset ), I will give a try on 66 Mhz enable via board jumpers.
: Is this method appropriate ? What I am assuming is bus will not give me worst timings.
Sorry for wrong mail ID
: ---Yang Li