| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Electrical and Electronic Community > Technical Forum > Message
Main Menu
Find

[ List Subjects ][ Current Board ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: Re: Potentiometers

Date: 02/29/00 at 5:41 AM
Posted by: Todd
E-mail: Sfla2@webtv.net
Message Posted:

In Reply to: Potentiometers posted by Todd on 02/28/00 at 5:44 PM:


: Hello. I bought a used Peavey brand mixer
board, model # 601R. Two of the knobs are missing
as a result of the previous owner broke the plastic
shaft off that protrudes upright from out off the
potentiometers that the knobs slip over. I would
like to replace the two potentiometers but have had
trouble finding exact replacements. I have searched
various parts stores both locally and on the
internet. I have even e-mailed Peavey's parts dept.
without any form of acknowledgement or reply.
: Both potentiometers are the same. The have
the numbers 8341a and 71190308-10K20A on their
sides, and the names ALPS and JAPAN on the
undersides of them. There are 3 leads that come off
on side, and one off the other. They sit about 1/2
to 3/4 of an inch off the p.c. board as a result of
the leads come off the potentiometers, and then
bend straight down and raise them up off the board.
If anyone could at least point me in a direction
where I could find two replacements, it would be
greatly appreciated. Thanks in advance, Todd.

I've sent e-mails to Peavey without any replies from them.


Follow Ups:


Post a Follow-up:

Name:
E-Mail:
Subject:

Message to Post:

 

1999-2001 Sunlit Technology Co., Ltd. All rights reserved.